Calgary Jeep Association

Author Topic: Raf's XJ  (Read 51533 times)

0 Members and 1 Guest are viewing this topic.

Offline raf2379

  • That CB Yapper
  • Posts: 752
Re: Raf's XJ
« Reply #15 on: April 02, 2011, 09:59:32 PM »
You are aware that is soon as you attach real frame rails to that thing, it stops being an XJ and becomes a modified YJ with a malfunctioning hard top, right?

lol i got nothing, no comback for that burn. damn

Offline Waytec

  • Talks waaay too much!
  • Posts: 1972
  • not all there
Re: Raf's XJ
« Reply #16 on: April 02, 2011, 10:35:14 PM »
well if you are building a fame it would be very easy to stuff a different engine in there. please tell us you are going with something other then the 4.0L
Why does your Jeep say Toyota on it?
The obstacle is the path.

Offline Vinman

  • CJA Executive
  • Talks waaay too much!
  • Posts: 2237
Re: Raf's XJ
« Reply #17 on: April 02, 2011, 11:19:23 PM »
That real frame is cool, how do you plan on fastening the body to it? Are you going to weld it to the frame or are you going to fab some body mounts and attach it like a traditional body on frame?

Vince
/l ,[____],
 l---L -OlllllllO-
 ()_)-()_)-o-)_)

Quote from: Bnine link=topic=25904.msg162940#msg162940      date=1341881306

 Resident prick is my job and it took me ten years to earn that title

Offline raf2379

  • That CB Yapper
  • Posts: 752
Re: Raf's XJ
« Reply #18 on: April 03, 2011, 09:15:02 AM »
well if you are building a fame it would be very easy to stuff a different engine in there. please tell us you are going with something other then the 4.0L

well I will have plenty of room for an LS1 or and LQ9, but for now the 4.0L has to go in until I can find one of the engines mentioned for reasnoable price with a full harness and ECU. the LS1 is 25lbs lighter than the 4.0 and the LQ9 is 10lbs heavier than the 4.0. i think they are the best candidates.

as for the body Im thinking hard mounted/welded body mounts.

Offline raf2379

  • That CB Yapper
  • Posts: 752
Re: Raf's XJ
« Reply #19 on: May 20, 2011, 08:51:50 PM »
small update, i got everything square and tacked together, test fitted. its ready for final welding.






Offline TL-Iguana

  • Talks waaay too much!
  • Posts: 1116
  • XJ - The Official TJ Rescue Vehicle
Re: Raf's XJ
« Reply #20 on: May 22, 2011, 12:28:19 AM »
Make a jig an sell those suckers Raf!!! Not that us XJ guys need real frames of course.... ;) Coming along really nicely since I last saw it :)
I did a Google search for "hot trannies" but nothing came up about oil coolers  :o

Worrying too much about mpg with a Jeep is similar to worrying about your sister's virginity. An ok thing to be concerned about but...

'01 XJ on 35s, '11 Jk DD

Offline raf2379

  • That CB Yapper
  • Posts: 752
Re: Raf's XJ
« Reply #21 on: July 14, 2011, 07:49:04 PM »
update, I had some time to finish welding the main part of the frame, minus some gussets and brackets.



i have the frame under the xj now, its all aligned i'm just waiting for my body mounts to arrive so i can attach it to the body.



also mocked up the rear axle with the tires on it to see the fitment.









next update I hope to have both axles in and ready to start my 4-link suspention.

« Last Edit: July 14, 2011, 07:50:35 PM by raf2379 »

Offline bRIBEGuy

  • Budget Lift
  • Posts: 292
Re: Raf's XJ
« Reply #22 on: July 16, 2011, 08:07:39 AM »
So awesome........

 :)
'00 XJ Classic, 3" OME lift, 32's, custom stereo.

Offline BEZZ

  • Budget Lift
  • Posts: 197
Re: Raf's XJ
« Reply #23 on: July 20, 2011, 10:31:13 AM »
Forget the XJ put the mini-van on that frame and axle setup!

Looks good buddy!
Buy some safety glasses.
You can jackoff with a fake hand but you cant see out of a glass eye.

Offline raf2379

  • That CB Yapper
  • Posts: 752
Re: Raf's XJ
« Reply #24 on: September 10, 2011, 08:43:12 PM »
got the body sitting on the frame now waiting on body mounts to show up.





Made up motor mounts and installed the motor. still need to fab up a cross-member for the transmission.






Offline TL-Iguana

  • Talks waaay too much!
  • Posts: 1116
  • XJ - The Official TJ Rescue Vehicle
Re: Raf's XJ
« Reply #25 on: September 11, 2011, 12:06:41 AM »
Daaamn! Coming along nicely Raf!! Cant wait to get out there again soon to see the progress in persson! :D
I did a Google search for "hot trannies" but nothing came up about oil coolers  :o

Worrying too much about mpg with a Jeep is similar to worrying about your sister's virginity. An ok thing to be concerned about but...

'01 XJ on 35s, '11 Jk DD

Offline OnyxGrizzly

  • Budget Lift
  • Posts: 184
  • Just another red XJ
Re: Raf's XJ
« Reply #26 on: September 14, 2011, 08:20:21 AM »
Bring me along please! haha :O
If you don't stand for something, you'll fall for anything.

Offline Rubi03 jef

  • Talks waaay too much!
  • Posts: 1918
  • she never understands
Re: Raf's XJ
« Reply #27 on: September 14, 2011, 10:54:01 AM »
fricken awesome .. this things going to be awesome
04 rubicon <4'' X series RC lift, 1.25'' RC body lift, 1'' RC MML, CV rear drive shaft,  Stubby front bumper, CB,35 MTZ" ,Hi Lifter 54'',LED tail lights , flat fenders, LED front Flasher, half doors, Light force spots, and CDN M101 custom Military trailer

Offline raf2379

  • That CB Yapper
  • Posts: 752
Re: Raf's XJ
« Reply #28 on: November 18, 2011, 06:12:00 AM »
the jeep is all leveled out on stands and finally I got the D60 under the xj, set in place ready to start the triangulated 4-link build. The front axle is pushed forward 4" and rear will be pushed back 5" for a 110" wheel base. I'm trying to build it so that later I can go up to 40" rubber.




Offline bRIBEGuy

  • Budget Lift
  • Posts: 292
Re: Raf's XJ
« Reply #29 on: November 20, 2011, 09:06:25 AM »
I'm trying to build it so that later I can go up to 40" rubber.

40" on an XJ?

A-W-E-S-O-M-E!

This is a really cool build to be watching.  REALLY makes me wish I could weld........
'00 XJ Classic, 3" OME lift, 32's, custom stereo.