Calgary Jeep Association

Author Topic: never build a ZJ......  (Read 49335 times)

0 Members and 1 Guest are viewing this topic.

Offline JackstandJohnny

  • Talks waaay too much!
  • Posts: 4727
  • where Jeeps go to die
Re: never build a ZJ......
« Reply #45 on: February 22, 2012, 09:37:53 PM »
drums = ghey

discs = well, they are stock ZJ jeep discs, so not much better.
~ rescue green JKUR on 35s.  typical rubicon build

Offline apeman

  • Talks waaay too much!
  • Posts: 1012
  • not as grumpy
Re: never build a ZJ......
« Reply #46 on: February 22, 2012, 10:16:17 PM »
You gonna weld up and redrill the backing plates for the swap?
Getting grumpier every day.
99 XJ - It's got sum stuff ,Noel free stuff..
98 ZJ - It's just ugly, but bigger than your Rubi

Offline JackstandJohnny

  • Talks waaay too much!
  • Posts: 4727
  • where Jeeps go to die
Re: never build a ZJ......
« Reply #47 on: February 22, 2012, 11:00:29 PM »
took backing plates off a disc braked exploder.  i have some D44a ones but they most certainly don't bolt up.

so its all bolted up right now, i'll use the calipers/discs/pads from my current one.  if they don't fit (they should) then i go buy new crap. no biggie ;)


~ rescue green JKUR on 35s.  typical rubicon build

Offline JackstandJohnny

  • Talks waaay too much!
  • Posts: 4727
  • where Jeeps go to die
Re: never build a ZJ......
« Reply #48 on: March 15, 2012, 08:59:02 AM »
8.8 is all bolted up.  oh how i missed the 'click click click' of an auto locker.

i'll do an update with pics and stuff later tonight.
~ rescue green JKUR on 35s.  typical rubicon build

Offline apeman

  • Talks waaay too much!
  • Posts: 1012
  • not as grumpy
Re: never build a ZJ......
« Reply #49 on: March 15, 2012, 03:45:53 PM »
Or you could just bring it out for some chili saturday. ..
Getting grumpier every day.
99 XJ - It's got sum stuff ,Noel free stuff..
98 ZJ - It's just ugly, but bigger than your Rubi

Offline JackstandJohnny

  • Talks waaay too much!
  • Posts: 4727
  • where Jeeps go to die
Re: never build a ZJ......
« Reply #50 on: March 15, 2012, 11:01:52 PM »
gotta work Aaron, sorry amigo.

couple pics








~ rescue green JKUR on 35s.  typical rubicon build

Offline raf2379

  • That CB Yapper
  • Posts: 752
Re: never build a ZJ......
« Reply #51 on: March 15, 2012, 11:26:16 PM »
looking good :)

Offline bradley

  • Budget Lift
  • Posts: 121
Re: never build a ZJ......
« Reply #52 on: March 17, 2012, 09:44:07 AM »
Very nice, almost done ey?
2002 jeep tj, 7 inch lift with long arm front and triangulated 4 link rear, 37x12.5x15 maxxis creepy crawler tires, custom front and rear bumpers, 12000 winch, G2 dana 44 front with detroit locker, 44 rear with spool, custom rear skins and flares, sye kit

Offline JackstandJohnny

  • Talks waaay too much!
  • Posts: 4727
  • where Jeeps go to die
Re: never build a ZJ......
« Reply #53 on: March 17, 2012, 03:39:00 PM »
looking good :)

thanks buddy :)

Bradley, yes its all done and installed :) i'm gonna go take some poser pics later.  probably in a parking lot..... at a mall..... flexed out on a parking curb ;)


so i dialed in the front end today.  adjusted the toe in and upper control arms, and track bar cause apparently i'm blind and it was off.  its sitting pretty good now. i'm really happy with how its riding. up to 140 today with no vibes what so ever. rear end is a little loud though.  not howlin but it ain't quiet.  bearings were good, so i might have to recheck backlash and stuff.  hope i don't have to pull the carrier again until i do gears and elocker.

the spartan locker in the rear is ok. its loud though. you can hear it click around corners and tight turns.  doesn't bind however, and for general driving, i can't even tell its there.  for a cheap mod i think its worth it. kind of wish i had gone with an elocker though..  only things i'm waitin on now are a JKS track bar which i don't really need in the rear, and a driveshaft spacer from IRO cause my shafts a lil' short (thats what she said)

also, i swapped the rough country crappy shocks for some bilsteins.  ride is 100% better. ride is almost stock at 5" of lift. i'm likin it!


more to do tonight/tomorrow though.  going to put my newish driveshaft in to get the CV one out of there (run the CV one as a spare) and gonna pull my CV axleshafts out for some XJ units with the bigger ujoints. 

pretty close to be dialed in and ready for trail use :)  overall its goin pretty good; and almost ready :)
~ rescue green JKUR on 35s.  typical rubicon build

Offline JackstandJohnny

  • Talks waaay too much!
  • Posts: 4727
  • where Jeeps go to die
Re: never build a ZJ......
« Reply #54 on: April 03, 2012, 10:14:42 PM »
put the ujoint axles in and new driveshaft.  jeeps good to go.

had her out at waiparous and she ran great.  thinkin long arms now though ;)
poser pic



and on an unrelated note,

some of you may remember this --->  
she's back home now. have some work to do to her, but she's running pretty well :)
« Last Edit: April 03, 2012, 10:52:15 PM by JackstandJohnny »
~ rescue green JKUR on 35s.  typical rubicon build

Offline bradley

  • Budget Lift
  • Posts: 121
Re: never build a ZJ......
« Reply #55 on: April 04, 2012, 08:30:51 AM »
I am glad to hear the first run went well, hope to c u out on the trails, it will b nice to c another zj out there
2002 jeep tj, 7 inch lift with long arm front and triangulated 4 link rear, 37x12.5x15 maxxis creepy crawler tires, custom front and rear bumpers, 12000 winch, G2 dana 44 front with detroit locker, 44 rear with spool, custom rear skins and flares, sye kit

Offline WhiteOut

  • Talks waaay too much!
  • Posts: 1885
Re: never build a ZJ......
« Reply #56 on: April 04, 2012, 09:09:47 AM »
No long arms and covered in Rough Country = Gay ???

Offline JackstandJohnny

  • Talks waaay too much!
  • Posts: 4727
  • where Jeeps go to die
Re: never build a ZJ......
« Reply #57 on: April 04, 2012, 09:28:37 AM »
i'll take lockers and rough country over long arms and open diffs.


OR....... maybe i'll just do both
~ rescue green JKUR on 35s.  typical rubicon build

Offline JackstandJohnny

  • Talks waaay too much!
  • Posts: 4727
  • where Jeeps go to die
Re: never build a ZJ......
« Reply #58 on: July 22, 2012, 09:40:52 PM »
been a while.

did some stuff.

Pook was good enough to fab me up a rear bumper.  pretty sturdy, i've hit it a few times ;)  its all tied into the hitch as well, so it should hold up.





and got busy this weekend too.. did some front end work.  i'm going to do a write up on jeepforum and i'll post a link.


basically, i cut out all the sheet metal on the underside of the ZJ. now theres lots of room to flex. its also pretty sturdy.........




 yes thats jacked up on the lift... didn't even budge



heres a link to build up

http://www.jeepforum.com/forum/f13/front-end-beef-zj-bumper-fender-mods-1396374/#post13905584

« Last Edit: July 22, 2012, 10:19:05 PM by JackstandJohnny »
~ rescue green JKUR on 35s.  typical rubicon build

Offline w squared

  • Talks waaay too much!
  • Posts: 3400
  • Keamy Hungry!
Re: never build a ZJ......
« Reply #59 on: July 22, 2012, 11:31:40 PM »
A ZJ Pre-Runner?  :)
I followed a rainbow out to a garage and found a leprichaun. The rainbow ended in a potted cactus on his porch, but there was no gold :(