Anyone with a Rubicon looking to go to 4.56 gears?

[Ddub1973]

So here is what I am thinking about doing....

I have a 2013 JKUR and I had 4.56 gears installed by 4 Wheel Parts in 2014.  I love the gearing but as most of you know I am stripping it and hoping the Jeep Truck comes out soon.... 

I am looking for someone with a 2012 - 2016 Rubicon that currently has 4.10 gears.

What this would be is a direct swap of both front and rear axles (housings and all).

My factory housing has the following:

- G2 Dana 44 JK Front Reverse 4.56 Ratio Gears
- G2 Dana 44 JK Rear 4.56 Ratio Gears
- G2 Dana 44 JK Rubicon Front Master Install Kit
- G2 Dana 44 JK Rubicon Rear Master Install Kit
- Alloy JK Dana 44 Red Outer Axle Tube Seals
- Front and Rear Lower Control Arm Skids

http://www.4wheelparts.com/Drivetrain-Differential/JK-Dana-30-44-Red-Outer-Axle-Tube-Seals.aspx?t_c=12&t_s=237&t_pt=101188&t_pn=ALY11105

http://www.4wheelparts.com/Drivetrain-Differential/Dana-44-JK-Front-Reverse-4-56-Ratio.aspx?t_c=12&t_s=237&t_pt=5092&t_pn=G%2f22-2051-456R

http://www.4wheelparts.com/Drivetrain-Differential/Dana-44-JK-Rear-4-56-Ratio.aspx?t_c=12&t_s=237&t_pt=5092&t_pn=G%2f22-2052-456

http://www.4wheelparts.com/Drivetrain-Differential/Dana-44-JK-Rubicon-Front-Master-Installation-Kit.aspx?t_c=12&t_s=237&t_pt=5094&t_pn=G%2f235-2051

http://www.4wheelparts.com/Drivetrain-Differential/Dana-44-JK-Rubicon-Rear-Master-Installation-Kit.aspx?t_c=12&t_s=237&t_pt=5094&t_pn=G%2f235-2052

http://www.4wheelparts.com/Armor-Protection/Lower-Control-Arm-Skid-Plate.aspx?t_c=79&t_s=467&t_pt=3545&t_pn=SYN8012-03

These above listed parts are $1,444.73 including tax.



This will work for an automatic, manual, 2 door or 4 door.

My housing has also had the front wheel bearings replace within the last year, as well I will be installing new front upper and lower ball joints within the next week.  I change the diff fluid regularly and only use Amsoil Synthetic.

I am looking for $1,600 for this deal.  With labour and shop supplies you would be over $2,500 for this at the shop.

I also bought the 4 Wheel parts warranty which should be transferable but that would have to be confirmed.

Please do not attempt to low ball me or make negative comments.

Please call or text as that is the fastest way to get me.
4O3-681-2O4O

Thanks,

Dwayne

[Ddub1973]

BUMP......OBO...

[FiEND]

you don't need to bump after two days.  maybe after it leaves the first page or after a month...

[Ddub1973]

Thanks for the tip, but if you notice it was more so that I could add OBO.


Sent from my iPhone using Tapatalk

[Ddub1973]

Ok so I found out the axle housings are the same from 2007 - 2016. 
So anyone with those years that are interested I am going to drop to $1,300. That is basically half price.


Sent from my iPhone using Tapatalk