Calgary Jeep Association

Author Topic: Anyone Know a Good Machine Shop?  (Read 403 times)

0 Members and 1 Guest are viewing this topic.

Offline Jrama

  • CJA Executive
  • That CB Yapper
  • Posts: 861
  • www.calgarycarbrokers.com
Anyone Know a Good Machine Shop?
« on: March 06, 2017, 10:03:24 AM »
Getting everything in place for my stroker, can anyone recommend a good shop to bore, and deck the block etc.?

Cheers


Offline hps4evr

  • Administrator
  • Talks waaay too much!
  • Posts: 2408
Re: Anyone Know a Good Machine Shop?
« Reply #1 on: March 21, 2017, 01:10:59 PM »
D&W
Broken Axle
We deal in Jeep parts and performance
General repairs, maintenance and diagnostics on all vehicles
403-237-7706
www.brokenaxle.ca
New Address
Bay 10, 3925 56th ave SE calgary
Like us on the Facebook

Offline ngrover

  • Stocker
  • Posts: 11
    • Xpedition XJ-Eh!
Re: Anyone Know a Good Machine Shop?
« Reply #2 on: March 24, 2017, 05:06:42 PM »
I'd like to hear more about your stroker build! What crank/parts/compression you are aiming for etc.

Offline Jrama

  • CJA Executive
  • That CB Yapper
  • Posts: 861
  • www.calgarycarbrokers.com
Re: Anyone Know a Good Machine Shop?
« Reply #3 on: March 25, 2017, 08:44:02 PM »
Jeep 4.2L 3.895" stroke crank
Jeep 4.0L 6.125" rods
Custom Hypereutectic +0.030" bore pistons, dish volume 24cc (Moly rings)
9.3:1 CR Static Compression ratio (6.7:1) dynamic ratio @ elevation)
<Stage 1 Cam Kit 263/265
.427/.438 Lift
LSA 114 >
Stock HO cylinder head
Mopar/Victor 0.043" head gasket
0.043" quench height (Close to zero as possible Deck height)
 '99-'00 Chevy LS1 26.2lb/hr injectors
« Last Edit: March 25, 2017, 08:48:42 PM by Jrama »