4x4 Related Groups > General Talk

Anyone Know a Good Machine Shop?

(1/1)

Jrama:
Getting everything in place for my stroker, can anyone recommend a good shop to bore, and deck the block etc.?

Cheers

hps4evr:
D&W

ngrover:
I'd like to hear more about your stroker build! What crank/parts/compression you are aiming for etc.

Jrama:
Jeep 4.2L 3.895" stroke crank
Jeep 4.0L 6.125" rods
Custom Hypereutectic +0.030" bore pistons, dish volume 24cc (Moly rings)
9.3:1 CR Static Compression ratio (6.7:1) dynamic ratio @ elevation)
<Stage 1 Cam Kit 263/265
.427/.438 Lift
LSA 114 >
Stock HO cylinder head
Mopar/Victor 0.043" head gasket
0.043" quench height (Close to zero as possible Deck height)
 '99-'00 Chevy LS1 26.2lb/hr injectors

Navigation

[0] Message Index