Calgary Jeep Association

Author Topic: In need of 1998 Cherokee XJ grill, bumper and passenger side front fender  (Read 930 times)

0 Members and 1 Guest are viewing this topic.

Offline theduke

  • Stocker
  • Posts: 1
Unfortunately my daughter hit her beloved XJ and is now in search of a grill and perhaps a fender. she was able to save the flare but needs fix the pass. side front corner... Also noticed that part of the horn is hanging on 1 wire. so if you still have a complete horn laying around somewhere? Also need front bumper corner section as well as the center steel part. There's one more question... I see a vacuum hose going down behind the lights (broken) but was it attached to anything or is it just a drain? Her Jeep is Deep Amethyst Pearl. but does not need to be colour match.  Who can assist?
« Last Edit: December 30, 2017, 01:42:46 PM by theduke »
2001 Cherokee XJ Classic

Offline Immortal

  • Talks waaay too much!
  • Posts: 3463
Re: In need of 1998 Cherokee XJ grill, bumper and passenger side front fender
« Reply #1 on: December 30, 2017, 06:05:07 PM »
Vac line should have been attached to the "softball" (vacuum canister). It sits up inside the bumper.

I may have a passenger side front panel kicking around, but it'll be outside and it's cold as beans out there.... and probably a horn.

PM sent.
if we were smart with our money we wouldn't own Jeeps.
Here's your cup of STFU... ENJOY!