Calgary Jeep Association

Author Topic: Jumping on to the R2.8 Conversion  (Read 165 times)

0 Members and 1 Guest are viewing this topic.

Offline Sixty4X4

  • Winch Wench
  • Posts: 26
Jumping on to the R2.8 Conversion
« on: February 15, 2019, 08:15:50 PM »
So after a lot of procrastination and pondering a new JLU Ruby I have decided to convert my 2008 JLU Ruby to a Cummins 2.8 simply because I need the fuel range for some long trips between fillups and of course the power. Also don't want to bash up a new $60k+ vehicle in the bush. So after all of this I will have a 170kkm 3.8/6 Speed, Clutch etc for sale. The engine runs without a tick ratlle or clunk and uses 0.5 liters in 7000km. We suspect it could be a Factory warranty replacement. It also does not leak oil. RThe Jeep can be demonstrated running as I will rent a garage and remove everything I do not want in April. I am asking $1500 for everything which I will only sell complete. No transfer case though. Swapped that already with a NP241. Using a Chev 6L80 tranny.

The other item I wanted to mention is that Cummins will look at motor discounts if we get about 4 or 5 people wanting the same crate setup. I know the motor is expensive at $12K CDN but a new Chev motor will set one back $7-8k to get plus $5k in adapter items such as computer, pedals mounts etc etc. It is a long shot but anyone wants to talk about this please email me at barryycindy@yahoo.com

I will be talking to AutoWorld in Great Falls, Montana. They specialize in making anything fit and CNC cut adapters etc for what they claim is much less $$$ than the regular suppliers like Bruiser etc and they supply the transmission computers etc. Basically could be a one stop shop. I will document the process in case anyone wants to follow along later anyway.

Barry

2008 JKU Ruby, Jeep steel bumper, 9500 winch, 3.8L, 6spd, stocker

Offline Sixty4X4

  • Winch Wench
  • Posts: 26
Re: Jumping on to the R2.8 Conversion
« Reply #1 on: February 16, 2019, 11:05:06 AM »
Also the rad is new in 2017 and will be for sale. Apprently no good for the 2.8.
2008 JKU Ruby, Jeep steel bumper, 9500 winch, 3.8L, 6spd, stocker

Offline Sixty4X4

  • Winch Wench
  • Posts: 26
Re: Jumping on to the R2.8 Conversion
« Reply #2 on: March 02, 2019, 05:02:53 PM »
So I have decided against the 2.8 due to cost vs Jeep value. Going with a 2017 5.3 Chev LT/8L90 8 speed tranny. Bought one in Texas with 17000 miles for real cheap and get everything from accessories (incl AC compressor which I need) and wiring harnesses and computer. So yes the V6 and 6 speed complete package will be for sale soon. Anyone interested and want to drive it before it comes apart? Then it is off to Broken Axle for OM Emu springs and Metal Cloak Control Arms.
2008 JKU Ruby, Jeep steel bumper, 9500 winch, 3.8L, 6spd, stocker

Offline hps4evr

  • Administrator
  • Talks waaay too much!
  • Posts: 2563
Re: Jumping on to the R2.8 Conversion
« Reply #3 on: March 02, 2019, 05:40:28 PM »
So I have decided against the 2.8 due to cost vs Jeep value. Going with a 2017 5.3 Chev LT/8L90 8 speed tranny. Bought one in Texas with 17000 miles for real cheap and get everything from accessories (incl AC compressor which I need) and wiring harnesses and computer. So yes the V6 and 6 speed complete package will be for sale soon. Anyone interested and want to drive it before it comes apart? Then it is off to Broken Axle for OM Emu springs and Metal Cloak Control Arms.
Stop by the shop, we are putting a Metalcloak order in this week.
The 5.3 will be a lot of fun in your Jeep:)
Broken Axle
We deal in Jeep parts and performance
General repairs, maintenance and diagnostics on all vehicles
403-237-7706
www.brokenaxle.ca
New Address
Bay 10, 3925 56th ave SE calgary
Like us on the Facebook

Offline Immortal

  • Administrator
  • Talks waaay too much!
  • Posts: 3341
Re: Jumping on to the R2.8 Conversion
« Reply #4 on: March 02, 2019, 06:24:57 PM »
Damn. I was wanting to see the lil diesel in action!!
if we were smart with our money we wouldn't own Jeeps.
Here's your cup of STFU... ENJOY!

Offline Sixty4X4

  • Winch Wench
  • Posts: 26
Re: Jumping on to the R2.8 Conversion
« Reply #5 on: March 02, 2019, 07:17:45 PM »
Broken Axle guys - I was going to come in before the conversion but will be there afterwards as I want to bring the Jeep in with the new engine installed so that we get the right stance. Wont be much heavier than existing as that engine weighs about 30-40lbs more than stock being all alloy block and heads.

Sorry about the reverse on the engines. With the new diesels coming I did not feel the price to convert was worth it. Just so you know I got the engine and transmission, accessories and harness with ECU for $3500US. Shipping is about $700 so a pretty good budget. I expect better gas mileage than the (should be illegal) gutless V6 3.8 which gives on a good day about 12.5-13L/100 and forget about passing above 80kph. And my son is licking his chops as he gets my Ruby TCase/ I get his but the 4.56 low gear in the 8 speed makes up for it. Ratios are 4.56/2.97/2.08/1.69/1.27/1.00/0.85/0.65 So with the 4.11 gears RPMat 110kph will drop from the present 2500 down to 1900 so the 4 cal mode will kick in lots seeing as it has to only lug about 4500lbs vs the truck it is out of @ 7000lbs or so. Not sure if I need bigger tires that the 33" Maxis Bighorns I have now. If so I will gear it down to 4.56. Will have this ready to go by June. Been advised to get the HD repp joint shafts like the stock Jeep units as they work the best according to a friend in Texas that has made the mistake of going double cardan and had lots of issues. Once I start I will log and post progress.
2008 JKU Ruby, Jeep steel bumper, 9500 winch, 3.8L, 6spd, stocker

Offline hps4evr

  • Administrator
  • Talks waaay too much!
  • Posts: 2563
Re: Jumping on to the R2.8 Conversion
« Reply #6 on: March 02, 2019, 09:01:24 PM »
Tire size Can be adjusted after everything has been built. You may need to strengthen the axles as well, extra power can cause even Dana 44’s to give up. Depends how you drive too. But even the nicest driver can get carried away with an extra couple hundred horses to play with;)
Broken Axle
We deal in Jeep parts and performance
General repairs, maintenance and diagnostics on all vehicles
403-237-7706
www.brokenaxle.ca
New Address
Bay 10, 3925 56th ave SE calgary
Like us on the Facebook