Calgary Jeep Association
4x4 Related Groups => Tech Talk => Topic started by: canfourjeep on October 22, 2008, 06:24:00 PM
-
I have a 95 2.5 with an AX5 transmission. I changed the transmission and removed the starter. When I put it back together the starter makes a loud squealing noise while starting. I used the same bell housing so there should be no difference. Any ideas?
-
mine does it when its cold out i know what you are talking about. After it warms up it starts with no squeal. Im all stock parts no change outs but nothing has happened yet. I wouldnt worry about it yet
-
Mine makes noise every time whether cold or hot
-
you probably got some grits and or water in it i have the same problem is your starter shaft with the sprocket on it that turns your fly wheel i tryed putting a lil lub on it which works for a lil bit then does it again and or your starters going i have been through 2 starters in two different jeep yjs with the same motors
-
I just had it rebuilt and it still does it.
Thanks