Calgary Jeep Association
4x4 Related Groups => Tech Talk => Topic started by: bdron on May 01, 2009, 08:58:39 PM
-
Does anyone know if there is supposed to be dowel pins in the bell housing to engine block? I any doing the clutch in mine and I noticed that the pilot bushing is very badly worn and I think there is some dowel pins missing between the bell and block. I believe that this is causing the vibration when releasing the clutch pedal. I want to help solve this problem.
1980 cj7 4.2 L
4 spd. trans
-
There definitely are supposed to be dowels in the bottom 2 bolt holes. They are actually more like pipes as the bolts pass though them. This will cause a vibration in the clutch.
-
bump