Calgary Jeep Association
4x4 Related Groups => General Talk => Topic started by: KrossLoch Fab on May 27, 2009, 12:05:24 PM
-
Please see the link on EJC.
(I need tutoring on posting pics on this site!!!)
http://edmontonjeep.com/forum/viewtopic.php?f=28&t=7371
-
Should be the same to post pics on EJC, host your photos on a site like photobucket.com,then copy the link here and press the little IMG tag in the reply screen...insert the copied link inbetween the IMG tags.
-
Make sure people use the outer bumper tabs as well. On my old XJ I pulled the heads of the bolts THRU the unibody!
-
Make sure people use the outer bumper tabs as well. On my old XJ I pulled the heads of the bolts THRU the unibody!
Good advice my friend!
-
Here you go Craig...
(http://edmontonjeep.com/forum/download/file.php?id=4757&t=1)
(http://edmontonjeep.com/forum/download/file.php?id=4756&t=1)
(http://edmontonjeep.com/forum/download/file.php?id=4758&t=1)
(http://edmontonjeep.com/forum/download/file.php?id=4759&t=1)
It would be also good if you would find a way to sleeve the holes that the 3 steering bolts goes through from side to side of the unibody... and weld the sleeve on both reinforcement plates.... there is a 4/3" to 1" hole that goes through the unibody a bit closer to the shock. You could put a rod through that also and weld it on both reinforcement plates also. Roseweld the crap out of both plates and box it in with a little plate on the underside on the unibody...
I have the JKS version of of that... that's what they do and it's it solid as a bastard.
(http://store.jksmfg.com/merchant2/graphics/jks/p_ogs960.jpg)
This is a great mod for an XJ... the unibody is prone to crack where the steering ... Nice Job!! ;D
-
Awesome! That is an cool mod too! Thx Swampsinger!