Calgary Jeep Association

4x4 Related Groups => Tech Talk => Topic started by: Jrama on November 05, 2009, 09:32:12 PM

Title: MML to KILL VIBES
Post by: Jrama on November 05, 2009, 09:32:12 PM

 TJ 3" lift right now with a T Case drop. Does anybody have opinions on what a 1" mml will do to potentially  get rid of the drop? I have dana 44 in the rear if that makes any difference.

Title: Re: MML to KILL VIBES
Post by: Bnine on November 06, 2009, 09:31:31 AM

Adjustable uppers would more then likely be required as well.

Title: Re: MML to KILL VIBES
Post by: Jrama on November 07, 2009, 08:04:21 AM

Thats a good point and something I didn't  think of until you mentioned it. 
Just to make sure i got things straight, the adjustable upper arms would be used to help point the pinion up, matching the t-case more less ?

about $200  for adj uppers
roughly $200  for bl and mml

SYE and drive shaft cost 600-700?
unless i can find one used

Title: Re: MML to KILL VIBES
Post by: Rubi03 jef on November 10, 2009, 09:59:36 PM

roll the diff up a bit and you should be fine

the mml list will just make it a bit better