Calgary Jeep Association
4x4 Related Groups => General Talk => Topic started by: 1988 Cherokee on February 01, 2010, 11:42:22 PM
-
I saw 2 YJ's at pick and pull today
-
Thanks bud... good to know!
-
Not a problem at all, just thought I would give you all a heads up on what I saw there. They had their hardtops still on.
There is a 81 fullsize cherokee pretty complete there as well.
-
Any idea if it was a wide trac with the fender flares?
-
I am unsure, I can tell you it had very long front hubs that stuck out. It had the AMC engine. Cant remember the flares.
I will most likely be there again tomorrow, if you can tell me what to look for I can get back to you.
-
A wide trac model will have some plastic/rubber flares on the fenders and may or may not have a wide trac decel on the back. I need the inner axle shafts from the front diff.
-
there was actually 2 full size jeeps there yesterday the yjs where still there one top was gone and one tub was gone someone took three springs out of one it had aftermarket shackles but only one was left
-
That 2nd one is a new one, where abouts was that located?
The one I saw was a 2 door 4 rows in from the entrance, in the truck section.
-
truck section back row almost beside the fence
-
you know what years? i need to know if i should be ditchin work friday to head down there.
-
Hey Johnnie: Talk to Jamie, he was cutting one them apart when I talked to him last Sat.
-
90 and 91, was still some good stuff left on Sat when we were there.
-
Ya there was someone taking off Rancho suspension on that blue XJ. Had some 15% BFG MT`s there.
That red one in same isle was in good shape, looked like it was parked under a pine tree for years. Interior is awesome shape.
-
The black cherokee ia a wide track model , 2door with the wide flares , it also has a 360 with the factory quadrajet carb on it. Front axles still intact late yesterday afternoon. When you walk in at is in the first couple of rows on the left. Hope this works for you Clay.
-
Sweet! Thanks for the info. I`ll probably try to get there tomorrow. Anybody looking for anything, I can scope it out for you....
JohnnyC, I`ll look and see if anything there has an external slave....
-
thanks Clay. i'll be there tomorrow too 8) i like being sick; can't goto work for fear of spreading germs, but i can hang out at PNP woop woop
-
Thanks for the tips guys! I picked up the shafts this morning. Grabbed the spindles and hubs as well. WOW prices sure went up, all that stuff cost me $175!!!!! :o
I took a look around there are a few XJs there, 5spd and autos, and 88 and 89 with NP242s.
One 6cyl ZJ with a NP242 t-case.
The white YJ has a 4.0 and most of its drivetrain, and the hood but the tub and front fenders are gone. The black YJ is topless, carbed 258, mostly still intact minus the dash and front passenger axleshaft, tub has rust in the typical spots.