Calgary Jeep Association

4x4 Related Groups => Tech Talk => Topic started by: M T on March 14, 2010, 12:38:53 PM

Title: TJ rack and bumper... maybe?
Post by: M T on March 14, 2010, 12:38:53 PM
I will be heading west this summer and need some more storage space in the TJ.  I am looking at those racks that sit above the spare tire.  Some of them look pretty flimsy!  And secondly, I really don't want to drill through the sheet metel - I will if it's the only option.  I will also need some sort of a hitch on the back in case I decide to tow something later on.  So I was also looking at those bumpers with the receiver built in - but boy those aftermarket bumpers are expensive!  

Basically, I am looking for some ideas for storage and a hitch of some sort.  Maybe a new spare tire carrier - then I could load it up!  If you have any ideas or insight, I would love to hear them (or see them).  Thanks.
Title: Re: TJ rack and bumper... maybe?
Post by: rollicon on March 14, 2010, 02:53:49 PM
(http://i62.photobucket.com/albums/h95/rollicon/Bumping019.jpg)
(http://i62.photobucket.com/albums/h95/rollicon/Bumping012.jpg)
(http://i62.photobucket.com/albums/h95/rollicon/Bumping015.jpg)
(http://i62.photobucket.com/albums/h95/rollicon/Bumping009.jpg)
(http://i62.photobucket.com/albums/h95/rollicon/Bumping016.jpg)
Can build you anything you want. Heres a couple pics of one I built for my buddys jeep. I'm a red seal welder so basically you dream it up and I'll make it happen. Just moved to Calgary so won't have my shop set up till May.
Title: Re: TJ rack and bumper... maybe?
Post by: sylvrinvader on March 14, 2010, 08:35:47 PM
i have a rugged ridge rack that i've been thinking of letting go
Title: Re: TJ rack and bumper... maybe?
Post by: OffRoadNewbie on March 14, 2010, 08:45:52 PM
here is the best deal i could find and maybe you could weld a rack setup to it ......i have this same bumper and swing out works good and you cant beat the price

http://www.trail-gear.ca/default.cfm?fa=products&ProdCategoryID=143
Title: Re: TJ rack and bumper... maybe?
Post by: jpthing on March 15, 2010, 11:24:11 AM
here is the best deal i could find and maybe you could weld a rack setup to it ......i have this same bumper and swing out works good and you cant beat the price

http://www.trail-gear.ca/default.cfm?fa=products&ProdCategoryID=143

I just received the same bumper, It's pretty good for the price, $280 and only $15 for shipping. Also has a receiver. So far so good. Srevice from trail gear is top notch. took about 14 days to get.
Title: Re: TJ rack and bumper... maybe?
Post by: Spinalguy on March 15, 2010, 06:09:14 PM
here is the best deal i could find and maybe you could weld a rack setup to it ......i have this same bumper and swing out works good and you cant beat the price

http://www.trail-gear.ca/default.cfm?fa=products&ProdCategoryID=143

What is the length of bumper? outside to outside?
Thanks.
Title: Re: TJ rack and bumper... maybe?
Post by: jeeptastic on March 15, 2010, 10:33:39 PM
here is the best deal i could find and maybe you could weld a rack setup to it ......i have this same bumper and swing out works good and you cant beat the price

http://www.trail-gear.ca/default.cfm?fa=products&ProdCategoryID=143

Hey Kyle I think you may have just helped North Shore sell a few of these bumpers. I have to admit I am looking at it too. You cant beat the price.
Title: Re: TJ rack and bumper... maybe?
Post by: jpthing on April 18, 2010, 02:35:48 PM
It's kinda weird, these bumpers seem to be made with a one inch body lift in mind...if you do not have one you will need to trim the rear flares a little, like on offroadnewbie's jeep.
Title: Re: TJ rack and bumper... maybe?
Post by: todaysempire on April 19, 2010, 10:09:00 PM
Will this bumper hold a 35x13.5 tire?
Title: Re: TJ rack and bumper... maybe?
Post by: jpthing on April 19, 2010, 11:07:57 PM
with a 35/12.5 there is about 2 inches cleearance behind the tire so I think it would.
Title: Re: TJ rack and bumper... maybe?
Post by: todaysempire on April 20, 2010, 08:29:53 AM
Could I just attach a wheel spacer so it fits?
Title: Re: TJ rack and bumper... maybe?
Post by: jpthing on April 21, 2010, 12:04:54 AM
yes but i think it would fit. it's aslo your backspacing to consider . you don't need a wheel spacer for a spare you could just use some nuts if it need to go out a little .
Title: Re: TJ rack and bumper... maybe?
Post by: OffRoadNewbie on April 21, 2010, 06:42:17 AM
i have 35s and i have no problems at all  ;)  and yeah i had to trim my fenders a bit but its minor  ;)
Title: Re: TJ rack and bumper... maybe?
Post by: w squared on April 21, 2010, 07:15:12 AM
here is the best deal i could find and maybe you could weld a rack setup to it ......i have this same bumper and swing out works good and you cant beat the price

http://www.trail-gear.ca/default.cfm?fa=products&ProdCategoryID=143

Holy snappers, batman. You TJ guys have it a lot easier on aftermarket parts than JK drivers.

The price of that whole package (front bumper, rear bumper, tire carrier, and sliders) is about on par for a front bumper for a JK....if you get a great deal.

The rear bumpers with tire carriers start at twice that price  :o
Title: Re: TJ rack and bumper... maybe?
Post by: jpthing on April 21, 2010, 12:50:31 PM
i have 35s and i have no problems at all  ;)  and yeah i had to trim my fenders a bit but its minor  ;)

yeah mine has a 1 inch body lift and it fits perfect...kinda weird huh? I got 35's too, he was asking about 13.5 width, I beleive you and I are both running 12.5's no?
Title: Re: TJ rack and bumper... maybe?
Post by: OffRoadNewbie on April 21, 2010, 08:39:36 PM
yeah true i think a 13.5 will fit tho  ;)