Calgary Jeep Association

4x4 Related Groups => Tech Talk => Topic started by: bgill on January 30, 2006, 11:26:29 PM

Title: 4lo problems on tj
Post by: bgill on January 30, 2006, 11:26:29 PM

anybody have any problems with their four lo. I have an 03 rubicon with 6 inch full traction long arm lift and 1 inch body and my 4 lo keeps slipping out. Seems like the handle to put it in four lo cannot go back far enough to fully engage the 4 lo.

Title: 4lo problems on tj
Post by: RedYJ on January 31, 2006, 01:54:49 AM

Check the linkage between the T-case and the shifter, maybe since the body lift it has moved the linkage and changed the angles that it works with.

Title: 4lo problems on tj
Post by: GiS on January 31, 2006, 08:24:58 AM

A) Trim your console and tub
B) Get the AA shifter relocation bracket that relocates the shifter to a hard mount on the T-case.

Title: 4lo problems on tj
Post by: Bnine on January 31, 2006, 11:32:45 AM

Quote from: "GiS"

A) Trim your console and tub
B) Get the AA shifter relocation bracket that relocates the shifter to a hard mount on the T-case.

Yep, shifter.

Theres a good skyjacker one that works as well. But you might find it just needs adjustment, try that first.

Your body lift should have come with a plate that corrects the shift linkage position.