Calgary Jeep Association
4x4 Related Groups => General Talk => Topic started by: THE GOLD DIIGGER on January 30, 2011, 09:50:57 PM
-
WHERE DO I GET ON BOARD AIR PUMP
-
FROM NORTHRIDGE 4X4!!!
:o
-
I have this:
ARB Air Compressor for Air Locker & Tire Inflation (http://www.northridge4x4.ca/proddetail.php?prod=ARB-RDCKA&cat=109)
and this:
ARB Air Compressor Pump Kit (http://www.northridge4x4.ca/proddetail.php?prod=ARB-RDCKA-PK&cat=109)
Quite happy with both, though I did pick up a longer hose from Princess Auto (supposed to be good to -40 deg C).
-
I have this:
ARB Air Compressor for Air Locker & Tire Inflation (http://www.northridge4x4.ca/proddetail.php?prod=ARB-RDCKA&cat=109)
and this:
ARB Air Compressor Pump Kit (http://www.northridge4x4.ca/proddetail.php?prod=ARB-RDCKA-PK&cat=109)
Quite happy with both, though I did pick up a longer hose from Princess Auto (supposed to be good to -40 deg C).
Yup and Stan has a custom bracket that mounts to the bolts of your master cylinder for a great mounting platform for the ARB
-
I thought those mounting brackets for the master cylinder were for JK's only - do they have one for TJs?
-
I thought those mounting brackets for the master cylinder were for JK's only - do they have one for TJs?
Dunno but the OP is running a JK if I recall correctly
-
http://www.viaircorp.com/OffRoad/oba.html
-
Dunno but the OP is running a JK if I recall correctly
OP is Bryan, running a Gold TJ Rubicon with swampers and chains :)
-
OP is Bryan, running a Gold TJ Rubicon with swampers and chains :)
My bad I thought it was a JK
In the case of the TJ I think you can mount it directly on the drivers side fender well ( heavy on the I think part) as there is a nice open space for it there.
-
I would second the viair setup!
-
OP is Bryan, running a Gold TJ Rubicon with swampers and chains :)
So you're saying he'll want to mount it the same way that you did?
-
i got a brand new viar 380 C chrome compressor sitting in my garage that i'm not needing $200 firm it's not in the box anymore but regardless it's still new
-
So you're saying he'll want to mount it the same way that you did?
Nope - I'm just saying that Bryan drives a TJ :P
But, since you brought it up ;D, I mounted mine on the driver's side fender (as was mentioned before). It's convenient there, and seems to be out of the way. If I had to do it again, I'd really consider seeing if someone could fab up a bracket and mount it off the firewall, or some other place under the hood (quite honestly, if I'd have found a bracket available for TJs that would mount to the brake master cylinder/booster like the JK bracket mentioned, I'd have used it).
-
Just ordered up an ARB today! Call Stan at Northridge, he has them in stock...ordered it today, he said I will have it tomorrow.
The bracket for JK's are pretty slick, I am surprised there isn't something similar out there for the TJ...
-
WHY DO YOU GUYS REPLY TO RETARDED QUESTIONS WITH COHERENT ANSWERS?
Are you really so eager to share a bit of tech and or info that you will do so when the person asking shows no respect what so ever for common board etiquette?
-
Well I don't have much tech knowledge when it comes to cars/offroading...so I just pitch in where I can. :-\
-
Thanks for info guys
-
Just installed my ARB high output compressor from Northridge 4x4... that bracket is great! Quick install too... Best way to go imho