Calgary Jeep Association

4x4 Related Groups => Tech Talk => Topic started by: Whips17 on March 12, 2011, 10:03:29 PM

Title: Transfer case
Post by: Whips17 on March 12, 2011, 10:03:29 PM
How much flex should my Dana 300 have? My shifter moves 3-4 inches up and down when I give her lotes of throttle
Title: Re: Transfer case
Post by: TL-Iguana on March 12, 2011, 10:58:39 PM
How much flex should my Dana 300 have? My shifter moves 3-4 inches up and down when I give her lotes of throttle

? Your transfer case shifter? Id think none... Are all your mounts solid under the jeep?
Title: Re: Transfer case
Post by: rangerdanger on March 12, 2011, 11:07:38 PM
Check the mount on the drivers side of the tcase, should have a bolt with a couple of bushings to keep the case from turning under load. Heres a pic
(http://i66.photobucket.com/albums/h268/86ranger/1UnitBoltedtotrans.jpg)
If thats missing, your tcase shifter will move side to side as you hit the throttle.
Title: Re: Transfer case
Post by: Whips17 on March 13, 2011, 06:27:54 PM
Ill chk that out thks.  :)