Calgary Jeep Association

4x4 Related Groups => Tech Talk => Topic started by: Vinman on October 16, 2011, 04:23:40 PM

Title: What replacement clutch we using now? OEM? aftermarket?
Post by: Vinman on October 16, 2011, 04:23:40 PM

2005 6 spd behind a 4.0L

Title: Re: What replacement clutch we using now? OEM? aftermarket?
Post by: Rookie on October 16, 2011, 04:25:48 PM

I've just been using OEM from napa had good luck so far

Title: Re: What replacement clutch we using now? OEM? aftermarket?
Post by: Vinman on October 16, 2011, 04:32:58 PM

Quote from: Rookie on October 16, 2011, 04:25:48 PM

I've just been using OEM from napa had good luck so far

Napa actually sells OEM Jeep clutchs?
Dealer quoted me $595 (tax in) for a new clutch & pressure plate, release bearing, pilot bearing, lever, ball and spring.

Vince

Title: Re: What replacement clutch we using now? OEM? aftermarket?
Post by: Rookie on October 16, 2011, 04:44:49 PM

Not quite OEM but the aftermarket version of the OEM last one i bought was about 250 for the disk pressure plate release bearing and pilot bearing

Steve

Title: Re: What replacement clutch we using now? OEM? aftermarket?
Post by: scott slade on October 16, 2011, 06:57:05 PM

Wait a minute...!!!   you saying we have to replace the clutch too....!!!!!  man....    >:(

Title: Re: What replacement clutch we using now? OEM? aftermarket?
Post by: tubby on October 16, 2011, 06:59:20 PM

I'd stay away from Centerforce clutches(stage1,2,3) if you go the aftermarket route. Brutal in day to day driving. Your left leg will thank me.

I've logged a ton of km's on LUK brand and Sachs brand clutches in my manual equipped vehicles over the years without any trouble, and the price was reasonable for my Jeeps.

Title: Re: What replacement clutch we using now? OEM? aftermarket?
Post by: vantagetes on October 16, 2011, 07:52:01 PM

I think I paid just under $300 from poon source for my clutch kit for the 2.5L.

The 6.0L has a LuK kit ready to go in.