Calgary Jeep Association

4x4 Related Groups => Tech Talk => Topic started by: Rubi03 jef on January 08, 2012, 11:03:42 PM

Title: Evap removal
Post by: Rubi03 jef on January 08, 2012, 11:03:42 PM

ok so im relocating my gas tank and i would like to remove all the Evap crap so i dont need to relocate that

does any one know what i would need to do

Title: Re: Evap removal
Post by: 03Jeeper on January 08, 2012, 11:19:04 PM

Read "Imped"s post. His turned pretty clean. Hope this helps.

http://www.jeepforum.com/forum/f9/5-stretch-what-do-evap-canister-1307424/

Title: Re: Evap removal
Post by: Rubi03 jef on January 08, 2012, 11:48:37 PM

well from what i read   ill just pull it all out and   since i already have a check engine light on . for my crack sensor   it wont bother me if it stays on because i got rid of the whole evap system

are both valves on the tank roll over valves ??

Title: Re: Evap removal
Post by: yellowjeep101 on January 09, 2012, 03:17:36 AM

don't quote me, but i'm about 90% sure they are both roll over valves.

Title: Re: Evap removal
Post by: rws on January 09, 2012, 08:32:40 AM

When I replaced the tank on my MJ with a fuel cell  I just put a hose with with fuel filter as a breather  on to the evap port thus eliminating the canister.

This is a common trick but search the web on how to route the hose in case of a roll over.  There is a detailed description on Pirate but thier site is down for maintance.