Calgary Jeep Association

4x4 Related Groups => Tech Talk => Topic started by: newfie glass on February 14, 2012, 08:59:39 PM

Title: best place for rust repair panels
Post by: newfie glass on February 14, 2012, 08:59:39 PM

im just trying to get an idea of prices for replacement panels for my k5. what are some good places that you guys have dealt with and could recommend?

Title: Re: best place for rust repair panels
Post by: TL-Iguana on February 14, 2012, 10:47:43 PM

Bought all my panels for my c20 from Pro Body Parts in Calgary... Dont remember the prices but they were fair :)

Pro Body Parts
2316 Portland Street S.E
Calgary, AB
T2G 4M6


TOLL FREE PHONE: 1-800-561-2776
PHONE: 1-403-287-7797

Title: Re: best place for rust repair panels
Post by: Pookapotamus on February 15, 2012, 06:11:20 AM

I just replaced my lower door skins, got them from keystone, used to be CPS. they did not fit at all and i have had very bad service from them, It might have just been my experience with them.

since then i have been dealing with Calgary body shop supplies, just across the street from acklands in the south, they have been real helpful, got me what i needed, and helped me get a great paint job on my jeep at a decent price.

Pook

Title: Re: best place for rust repair panels
Post by: newfie glass on February 15, 2012, 08:12:13 PM

thanks guys, i will give them all a call tomorrow and compare prices.

Title: Re: best place for rust repair panels
Post by: newfie glass on February 22, 2012, 07:15:49 PM

i made some calls and fenders are around $60-$80 and inners are around $45. good prices. no one could find the front floor pans so im just gonna get some sheet metal and make what i need but where do you guys get your sheet metal from? And im also toying with an idea of using square stock to replace the rockers, would metal supermarket be the best place?

Title: Re: best place for rust repair panels
Post by: Tyn Pow on February 22, 2012, 07:57:32 PM

Quote from: newfie glass on February 22, 2012, 07:15:49 PM

And im also toying with an idea of using square stock to replace the rockers, would metal supermarket be the best place?

I got mine at Federal....decent guys to deal with