Calgary Jeep Association

4x4 Related Groups => Tech Talk => Topic started by: Kanueh on May 30, 2012, 03:05:06 PM

Title: HELP
Post by: Kanueh on May 30, 2012, 03:05:06 PM

I'm trying to install new front shocks and can't get the bushings in the lower portion. Do they have to be pressed in?

I tried wd40 and a rumble mallet. Then tried pressing it in with a bolt, but and a couple big washers but nothing.

Any suggestions?

Title: Re: HELP
Post by: tubby on May 30, 2012, 03:11:09 PM

Use a bench vise and a socket. Apply small amount of lube to bushing. Takes under 5 minutes to do.

Title: Re: HELP
Post by: Kanueh on May 30, 2012, 03:11:46 PM

Now only if I still had that vice....crap

Title: Re: HELP
Post by: tubby on May 30, 2012, 03:15:21 PM

Damn things come in handy. You'll need one sooner or later to do u-joints.

Title: Re: HELP
Post by: Kanueh on May 30, 2012, 03:36:14 PM

Woo Hoo my neighbor had a vice! Hot them in like 5 minutes.

Title: Re: HELP
Post by: Kanueh on May 30, 2012, 04:05:51 PM

Thanks for the help

Title: Re: HELP
Post by: EviLAnTo on June 09, 2012, 03:04:11 AM

Use a big c clamp and a small piece of wood to even the pressure