Calgary Jeep Association
4x4 Related Groups => Tech Talk => Topic started by: Marco on June 19, 2013, 09:38:16 AM
-
Decided to try this and see if it works. My transmission was out anyway from a clutch job but its not necessary. Seem to make the shifting shorter but i havent tried it on the street yet haha
Making a template:
(http://i603.photobucket.com/albums/tt112/marco99_01/image.jpeg)
cut up some 1/2" strips i found at Can tire for $3
(http://i603.photobucket.com/albums/tt112/marco99_01/image1.jpeg)
weld strips together
(http://i603.photobucket.com/albums/tt112/marco99_01/image2.jpeg)
cut small piece of rod for the extension
(http://i603.photobucket.com/albums/tt112/marco99_01/image3.jpeg)
cut the shifter rod above the ball somewhere and ad in the extension piece you cut. (1/2" to match the the other spacer metal)
(http://i603.photobucket.com/albums/tt112/marco99_01/image4.jpeg)
as long as you have a 1/2" spacer of some sort its a fine.
(http://i603.photobucket.com/albums/tt112/marco99_01/image5.jpeg)
test it out!
(http://i603.photobucket.com/albums/tt112/marco99_01/image6.jpeg)