Calgary Jeep Association
4x4 Related Groups => Tech Talk => Topic started by: JackstandJohnny on January 03, 2014, 11:17:46 AM
-
my AC is shot anyways. might as well make good use of it.
is there anything specific i need to do to my A/C pump to plumb it for air?
i've set one up before, so i know i need the tank, regulator, fittings, need to wire it etc.
if i recall correctly, to make it work i just need to put an 'inline' oiler on the intake and a 'separator' on the air hose right?
thanks :)
edit; read some old threads; should be good to go; only have to pull it apart if you want to use grease as a lubricant; i'm good with oil
-
I think there is a hole in the body you have to tap and plug.
Canadian4wd did a great article - lemme know if you want me to try and find that issue for ya
Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)
-
I know Lukeduke filled his with grease instead of adding an oiler...seems to work great for him.
-
i bine looking for how to do the grease mod for my jeep .no idea what it look for or what its called to look on internet .
-
TL iguana's write up
http://forum.calgaryjeep.com/index.php?topic=21332.0
i'll just use an oiler. if theres some plugs to fill i'll do it. not sure where they are but i'll find it. and plug it :)
just need a tank and I can start this :)
-
I knew I had it stored deep in the bowels of my endless supply of jeep articles....
http://www.grungle.com/endlessair.html
The write up is extremely detailed, down to even the cost of each part.
Good luck Johnny. :)
-
One other thought....recharge your A/C and add a second compressor....like so:
http://www.naxja.org/forum/showthread.php?t=1106404
-
Grease is the way to go. The grungle link is spot on. No oil to mess with. I just gave it a few shot of grease every couple of months and that's it.