Calgary Jeep Association

4x4 Related Groups => Tech Talk => Topic started by: bRIBEGuy on February 07, 2016, 11:18:01 AM

Title: XJ Rear Hatch Swap Wiring Issues
Post by: bRIBEGuy on February 07, 2016, 11:18:01 AM

So due to "circumstances", I'm having to replace the entire rear hatch on my 2000 XJ.  I managed to find a reasonable hatch from a 1998, but have discovered that the wiring harness plugs are completely different.  GAH!!!

Has anyone ever come across this before and/or has an easy solution?  I'm thinking I could cut the plugs off of each harness with a few inches of wire, and splice the new plugs onto the old harness, but this also makes the assumption that the wires and their color codes are even the same.

Thoughts from the experts out there?

Title: Re: XJ Rear Hatch Swap Wiring Issues
Post by: Dingleberry on February 07, 2016, 01:58:39 PM

...do any of the coloured wires NOT match up?

If you're all clear, do what you just mentioned.

Title: Re: XJ Rear Hatch Swap Wiring Issues
Post by: bRIBEGuy on February 07, 2016, 02:03:23 PM

I just went thru all the wires, and 11 out of the twelve match up color-wise.  As such, I'm guessing the miss-matched colors go together for the twelfth connection.

Looks like I'm spending tomorrow with a soldering iron.........

Title: Re: XJ Rear Hatch Swap Wiring Issues
Post by: bRIBEGuy on February 13, 2016, 02:13:17 PM

Quote from: bRIBEGuy on February 07, 2016, 02:03:23 PM

I just went thru all the wires, and 11 out of the twelve match up color-wise.  As such, I'm guessing the miss-matched colors go together for the twelfth connection.

Theory was correct.  Plug swap successful.