Calgary Jeep Association

4x4 Related Groups => Tech Talk => Topic started by: ndub on February 28, 2007, 11:00:29 PM

Title: rubi rockers
Post by: ndub on February 28, 2007, 11:00:29 PM

Picked up some rubi rockers for the tj...and ideas for drilling the holes into the body.  Would like some advise from anyone who has already done this so I can avoid any fatal error.
thanks

Title: rubi rockers
Post by: ramtuff on March 01, 2007, 09:56:11 AM

mount them with clamps, tight with the body and seated properly against the bottom of the tub. use a center punch, preferrably the kind that is self centering in the hole. remove the rocker. pilot drill the holes to 1/8", then redrill to the size of your fasteners. paint the holes, then re-install the rocker. repeat for the other side.