Calgary Jeep Association

4x4 Related Groups => Tech Talk => Topic started by: Impact on April 23, 2007, 02:20:00 PM

Title: Info on full width axle sawp....
Post by: Impact on April 23, 2007, 02:20:00 PM

Hi,
I am looking for some info about a full width axle swap (D60/GM14) for CJ/YJ's. Does anybody have any personal experience or tips about this swap? Are there any companies that carry a convertion kit?

Title: Info on full width axle sawp....
Post by: BlackYJ on April 23, 2007, 02:27:21 PM

Check out Pirate 4x4, there are a couple bibles there

Title: Info on full width axle sawp....
Post by: Impact on April 23, 2007, 02:38:44 PM

Do you have a link to those bibles?

Title: Info on full width axle sawp....
Post by: BlackYJ on April 23, 2007, 03:10:17 PM

Go to http://www.pirate4x4.com and they are on the front page

Title: Info on full width axle sawp....
Post by: Brink on April 25, 2007, 10:21:32 PM

77-78 Ford 60 Just about bolts right up in the front. If I remember right the pads are within 1/2inch of the stock YJ width.  Rears are all easy.  Just cut off the perches and move to match your spring pad width.

Title: Info on full width axle sawp....
Post by: GiS on April 26, 2007, 11:53:51 AM

What he said, 86+ Ford and you are going to be outboarding your springs.