Calgary Jeep Association

4x4 Related Groups => General Talk => Topic started by: Mudhawg on May 26, 2007, 03:56:24 AM

Title: question non jeep related
Post by: Mudhawg on May 26, 2007, 03:56:24 AM

so after takin my zuk out this past weekend i have no clutch... 1st problem... the clutch cable had ripped through the firewall saturday mornng luckily my buddy had his welding rig so we re plated the firewall and i was rolling again... now i get anoher day of wheelin in... go to leave monday morning and no clutch??? could it be out of adjustment/packed with dirt???

Title: question non jeep related
Post by: Bnine on May 28, 2007, 02:28:01 PM

Stay out of the slop.

Check that the clutch fork, or slave is moving.

If the cable is working, you bought yourself a clutch because of the mud.

Title: question non jeep related
Post by: Mudhawg on May 28, 2007, 02:33:35 PM

so one way or another i gotta drop the tranny? ugh guess gotta get er done to go out canada day

Title: question non jeep related
Post by: Bnine on May 28, 2007, 02:39:44 PM

No, if the slave or fork doesnt move when you push the pedal, then the problem is exterior. Broken cable on a mechanical, bad master cylinder or slave if hydraulic.

If it does move, but you have no clutch, then its internal, and time to drop the trans.

Title: question non jeep related
Post by: Mudhawg on May 28, 2007, 02:48:39 PM

the truck still moves just slips VERY bad... like 5000rpm and im moving 2 feet i tryed driving it from the gravelpit to the staging area monday morning after the weekend and i made it 1/2 way and it wouldnt move

Title: question non jeep related
Post by: Bnine on May 28, 2007, 02:50:29 PM

Your clutch is done.

Title: question non jeep related
Post by: Mudhawg on May 28, 2007, 02:51:14 PM

time to go visit my buddy at autovalue and take him 169 dollars