Calgary Jeep Association
4x4 Related Groups => Tech Talk => Topic started by: jeeppilot on August 18, 2005, 08:36:53 PM
-
Just lookin for a little help-. I have a 93 2.5L. While running, the engine temp gauge reads about 70 degrees (normal), but when I give it a little gas the needle fluctuates down to the lower end of the scale. The fluctuations are in sync with the accelerator. What gives??
-
are you sure you're not looking at the fuel gauge :lol: :lol:
could be voltage related .. I would check you have a ground wire (flat braided) coming off the rear of the engine and going to the firewall.
-
Are the fluctuations directly linked with the gas, or is there a delay?