Calgary Jeep Association

4x4 Related Groups => Tech Talk => Topic started by: AMCcrazy on March 27, 2008, 08:02:07 PM

Title: Rollerized injected 401 into Blinkinlights Waggie. Yes there is a test.
Post by: AMCcrazy on March 27, 2008, 08:02:07 PM

 OK so I mated Gregs tranny and motor and with a 2 hour fight with torque converter bolts(put in oversize bolts but converter was drilled 32nd of an inch off on two holes) I hoisted it high overhead and it began its journey back to life.

This is the test part.

What is wrong with this picture?

(http://i104.photobucket.com/albums/m166/HARDCOREPacer/IMG_1939.jpg)


you have to look close
here is another angle

(http://i104.photobucket.com/albums/m166/HARDCOREPacer/IMG_1940.jpg)

here it is in the bay I will put the tranny xmember on tommorrow and then wheel it back outside.

(http://i104.photobucket.com/albums/m166/HARDCOREPacer/IMG_1941.jpg)

Title: Re: Rollerized injected 401 into Blinkinlights Waggie. Yes there is a test.
Post by: Rookie on March 27, 2008, 08:42:35 PM

Quote from: AMCcrazy on March 27, 2008, 08:02:07 PM

This is the test part.

What is wrong with this picture?

(http://i104.photobucket.com/albums/m166/HARDCOREPacer/IMG_1939.jpg)


 

2 wheel drive tranny 

divorced transfer case??

Title: Re: Rollerized injected 401 into Blinkinlights Waggie. Yes there is a test.
Post by: AMCcrazy on March 27, 2008, 08:50:24 PM

you are absolutely right.

Title: Re: Rollerized injected 401 into Blinkinlights Waggie. Yes there is a test.
Post by: Rookie on March 27, 2008, 09:05:02 PM

Quote from: AMCcrazy on March 27, 2008, 08:50:24 PM

you are absolutely right.

Do I win anything??

Title: Re: Rollerized injected 401 into Blinkinlights Waggie. Yes there is a test.
Post by: AMCcrazy on March 27, 2008, 09:12:17 PM

uh? I hadn't thought it that far through.

Title: Re: Rollerized injected 401 into Blinkinlights Waggie. Yes there is a test.
Post by: cLAY on March 27, 2008, 09:32:39 PM

ARGRRLL.....(homer drool...)