Calgary Jeep Association

4x4 Related Groups => General Talk => Topic started by: Layback209 on April 28, 2008, 05:27:37 PM

Title: My 4.0L valve cover
Post by: Layback209 on April 28, 2008, 05:27:37 PM

Well figured it was time to freshen up under the hood a bit. Engoy

This is what i started with
(http://i185.photobucket.com/albums/x45/Layback209/100_9575.jpg)

After some scrubing
(http://i185.photobucket.com/albums/x45/Layback209/100_9579.jpg)

Kinda wanted to just finish polishing the aluminum and seal it with something o well next ride.
(http://i185.photobucket.com/albums/x45/Layback209/100_9578.jpg)

Base Coat
(http://i185.photobucket.com/albums/x45/Layback209/100_9580.jpg)

After all the masking was removed, next ime i'm going to double layer it got a little to much bleading but i need my jeep back together lol. Actualy the hole point of this was to stop my blow by, but im sure ive acomplished that now :).
(http://i185.photobucket.com/albums/x45/Layback209/100_9581.jpg)
(http://i185.photobucket.com/albums/x45/Layback209/100_9582.jpg)

Any thoughts or opinions are welcome

Cheers,

That guy in Okotoks.

Title: Re: My 4.0L valve cover
Post by: yyc_tbird_sc on April 28, 2008, 05:36:45 PM

Looks good! I've gotta get on the truck and mess with stuff like that if I can figure out the steering first

Edit...never mind, I thought you had the 4.2L