Calgary Jeep Association
Off Highway Staging Area => CJA Events => Topic started by: Knox on June 01, 2013, 03:18:30 PM
-
Thanks everyone we had a great day!
(http://i3.photobucket.com/albums/y100/KnoxSteve/CJA/13thSnS.jpg) (http://s3.photobucket.com/user/KnoxSteve/media/CJA/13thSnS.jpg.html)
-
let me know how i can help
-
CJA exec ; message me please on the event
-
What can I do to help?
-
I'm happy to help out with this also. :)
-
What can I do to help?
Pm'd
-
What can I do to help?
There will be lots to do the day of. I'll post closer to the day on specifics
-
Also willing and ready to volunteer! (if my not being a member yet isn't a problem)
-
If you need help please let me know.
-
Help will always be welcome for the day of, just go up to anyone in a vest and we'll find something to do for everyone who wants to help
-
13th show and shine is this Saturday!
Lots of prizes to be won
10-2 boomtown parking lot see you all there
-
i will be by after work to drop off 12 prizes. Probably by 12:30.
If this is too late, would anyone be there by 8:30am that i could drop off the prizes before i go to woirk?
Thanks
-
EMF Will be donating our Jeep Steering system worth about $600. It features 4 of EMF's rebuildable, adjustable, greaseable Chromoly tie rod ends with Jeep Tapered pins and a Tie Rod & Draglink made out of solid 1018 material. It will be a direct bolt in for any stock to 6" lift on a TJ, YJ, MJ, ZJ and LJ. Not sure about the JK yet as we didn't get a chance to get a hold of a test vehicle.
Good luck with the S&S!
-
i will be by after work to drop off 12 prizes. Probably by 12:30.
If this is too late, would anyone be there by 8:30am that i could drop off the prizes before i go to woirk?
Thanks
I live very close to your clinic - since you've been such a great long time supporter, why don't I stop by to pick up the prizes and bring them over to Knox?
-
EMF Will be donating our Jeep Steering system worth about $600. It features 4 of EMF's rebuildable, adjustable, greaseable Chromoly tie rod ends with Jeep Tapered pins and a Tie Rod & Draglink made out of solid 1018 material. It will be a direct bolt in for any stock to 6" lift on a TJ, YJ, MJ, ZJ and LJ. Not sure about the JK yet as we didn't get a chance to get a hold of a test vehicle.
Good luck with the S&S!
That is a GREAT prize!
-
I live very close to your clinic - since you've been such a great long time supporter, why don't I stop by to pick up the prizes and bring them over to Knox?
wow, thank you but i am only here from 3-6pm this afternoon.
-
I can also swing by tomorrow AM before the show n shine starts. You're pretty much on my way there.
-
I can also swing by tomorrow AM before the show n shine starts. You're pretty much on my way there.
Thanks Todd. i am here 9-noon
-
Works for me. If the honeydew list allows me to get over to your clinic before 6PM, I will. If not, I'll be there at 9 tomorrow AM.
Thanks!
-
okay so i will be dropping said emf steering kit off tomorrow morning on my way to work... is anyone gonna be around that area between 8 and 9....
-
So what time?? Is 8 about right?? I've got the tables loaded and good to go
Sent from my iProne
-
okay so i will be dropping said emf steering kit off tomorrow morning on my way to work... is anyone gonna be around that area between 8 and 9....
I will be there by 8am
-
Ok I will LEAVE at 8 as we slept in. See you soon
Sent from my iProne
-
Can I still get in if I'm late?
-
Great job with the show & shine, it was a ton of fun!
Since it's not offroad, can we post up pictures of the event directly to the CJA site, or should we link to them as per usual?
-
Post away
-
For your viewing pleasure......
(https://lh4.googleusercontent.com/-8Gp02XpSZbU/UeMjzrjvg8I/AAAAAAAAA78/jkIqE1Pm-U0/w560-h829-no/072+-+Blue.jpg)
(https://lh3.googleusercontent.com/-HR_SmwM52Is/UeMizd8ytGI/AAAAAAAAA6U/2XNhd1RAnlU/w1056-h830-no/033+-+J10.jpg)
(https://lh4.googleusercontent.com/-7vdpZZTHPzc/UeMivZQN24I/AAAAAAAAA6M/79B4Ws_nw0A/w1267-h830-no/044+-+Mortis.jpg)
(https://lh6.googleusercontent.com/-sbVTFVj8v2I/UeMjfYVSYWI/AAAAAAAAA6k/AhgufUd__Pw/w553-h830-no/059+-+Marshal+XJ.jpg)
(https://lh3.googleusercontent.com/-aJnGcEtX_BY/UeMkdhw12EI/AAAAAAAAA68/fUIEW-h2vO0/w1311-h830-no/091-+AmorFlex2.jpg)
(https://lh6.googleusercontent.com/-_S_svU1XLW4/UeMle9nJpwI/AAAAAAAAA7k/ivjO8UZyym0/w1245-h830-no/200.JPG)
(https://lh3.googleusercontent.com/-ccwIRrk43jI/UeMkLLexqGI/AAAAAAAAA60/RmWM09FgUq0/w1212-h830-no/076+-+Willys.jpg)
(https://lh6.googleusercontent.com/-QU74_Jz0tHI/UeMlGpsUKII/AAAAAAAAA7U/CdoJep4b7hw/w1245-h830-no/183.JPG)
(https://lh4.googleusercontent.com/-mM9YIXvwR2g/UeMlSn8OIbI/AAAAAAAAA7c/A1bDtVbLIuU/w1245-h830-no/192.JPG)
(https://lh6.googleusercontent.com/-R97x5zhMgI0/UeMk57azyVI/AAAAAAAAA7M/k1yqnrONAXs/w1308-h830-no/177+-+ZJ.jpg)
(https://lh3.googleusercontent.com/-eXPEv7Yis2o/UeMkpsBLmWI/AAAAAAAAA7E/FBtcuy1MPHE/w1245-h830-no/172.JPG)
(https://lh5.googleusercontent.com/-z53r1sejteI/UeMjJ8_Ga-I/AAAAAAAAA6c/KkfkJZfBHy8/w1238-h830-no/052+-+Red+Deer.jpg)
-
Awesome pics mark! Thanks!
-
For your viewing pleasure......
Freat pics!
Camera?
how much editing/photoshopping?
Thanks
-
Thanks for having me down. Was a great day hanging with some guys and gals I haven't seen in a while.
-
Thanks to everyone who were patient on the rti ramp with us being safety nazi's. :)
-
Camera?
how much editing/photoshopping?
Thanks
1/2 the shots are from an Olympus EPL3 with an Olympus 12mm f/2.0 lens. Straight out of the camera JPEG with no editing.
1/2 the shots are from a Fuji X-Pro1 with a Fujinon 35mm f/1.4 lens. RAW with fairly minor editing.
:)
-
Who won the EMF Steering system??
-
I believe "Crunch" did.
-
Congratulations "Crunch". We owe you a tie rod and a drag link for your system so give us a shout and we will get on it. We ran out of time to machine them before the show n shine. [email protected] or 403-935-3540
Thanks!
-
Crunch picked them up for bario01* Thanks EMF lets get this cool stuff on the YJ!
-
Who won the welding helmet and gloves and makita tool?
-
Who won the welding helmet and gloves and makita tool?
I believe that was XXXJ that won the helmet and gloves but traded for the hi-lift?
-
Really wish I'd been able to make this but didn't get back into town in time. Thanks for posting those pics though, looks like it was fun!