Calgary Jeep Association
4x4 Related Groups => Tech Talk => Topic started by: stoggy97tj on August 07, 2008, 10:25:47 AM
-
Being new to my tj experience i have never changed a transfer case......
I have it on a 2.5l 5speed combo and i finally got my replacement transfercase. Can anybody tell me any suprises i might be expecting?
The hanes manual just says remove with transmission then seperate but i dont want to do that.
I have a fair bit of light duty GM stuff but dont know how it will differ.
Any suprises i can avoid will be appreciated!
-
Just support the tranny, remove the skid plate and then remove the t-case, 6 bolts I believe. A coffee cup with some show towels or something over the tail housing will provide you from spilling oil all over the place when you pull off the t-case
-
Right on I was hoping the spillage would be down to a min. But I picked it up today and everything looks alright, I told the guy it was for a 97 tj and according to his "interchange" book one off a 2000 will bolt on so thats what i got.....
Hopefully it will work without any problems