Calgary Jeep Association

« previous next »
Pages: [1]   Go Down

Author Topic: 4.2 L tach wiring.  (Read 1850 times)

0 Members and 1 Guest are viewing this topic.

Offline bdron

  • UberWheeler
  • Posts: 369
4.2 L tach wiring.
« on: December 02, 2008, 05:37:38 PM »
I have a 1980 cj7 with a straight six 258. It originally had a 304 ci v8. I am trying to hook up a tach. from a 6 cylinder to the wiring harness from the 304 but it has a 3 wire connector and now I only need 2 wires.
 anyone have any ideas what I can do?
Logged

Offline stroker sahara

  • UberWheeler
  • Posts: 361
Re: 4.2 L tach wiring.
« Reply #1 on: December 02, 2008, 10:43:12 PM »
I would assume that the 2 wire harness grounded through the body of the tach, which leaves a switched 12V power source and a wire to the negative side of the coil, but I could be wrong.
Logged
If you want to run with the big dogs you have to be able to pee in the tall grass.


1989 YJ SOA, 36" SX, 4.6 Stroker...

Offline bdron

  • UberWheeler
  • Posts: 369
Re: 4.2 L tach wiring.
« Reply #2 on: December 13, 2008, 08:34:58 PM »
It is the factory cj 6 cylinder tach that I am putting in but the 2 wires from it are red and none of the old wires are red.
Logged
Pages: [1]   Go Up
« previous next »