Calgary Jeep Association

« previous next »
Pages: [1]   Go Down

Author Topic: BALL JOINTS  (Read 950 times)

0 Members and 2 Guests are viewing this topic.

joker

  • Guest
BALL JOINTS
« on: April 03, 2009, 01:32:54 PM »
these are something i shoundnt fix my self corrrect? seeming as i would need an alignment. but dose any 1 know the rough cost to get it done
Logged

Offline fug

  • CJA Executive
  • Talks waaay too much!
  • Posts: 2345
  • Airdrie Pick n Pull
Re: BALL JOINTS
« Reply #1 on: April 03, 2009, 02:13:22 PM »
You could definitely do it yourself... it's not overly difficult for the mechanically inclined.  I'd say the biggest pain is getting the ball joints out and in ... and you can get the tool from Princess Auto for a decent price.

Write up here
Logged
Fug
TJ Rubicon

joker

  • Guest
Re: BALL JOINTS
« Reply #2 on: April 03, 2009, 02:37:30 PM »
wont it need an alignment
Logged

Offline fug

  • CJA Executive
  • Talks waaay too much!
  • Posts: 2345
  • Airdrie Pick n Pull
Re: BALL JOINTS
« Reply #3 on: April 03, 2009, 02:53:07 PM »
Since my TJ is lifted and modified, I have always done my own alignments at home (there's articles out there on the web on how to do them if you're interested).   Changing your ball joints isn't going to change your alignment that much.... and  it won't put you into death machine category... you could just take it by the alignment shop after you change the joints.
Logged
Fug
TJ Rubicon

Offline Canuck Bob

  • Winch Wench
  • Posts: 40
Re: BALL JOINTS
« Reply #4 on: April 06, 2009, 10:19:13 PM »
My Parts Source lends the needed tools for such work.  The alignment on most TJ's is just a toein check.
Logged

FullMetalJeep

  • Guest
Re: BALL JOINTS
« Reply #5 on: April 07, 2009, 08:47:45 AM »
keep in mind, ball joints wear almost evenly, so if you do one side, it's suggested you also do the other side as its probably close to the same condition... saves you from having to do it twice.
Logged

Offline Bnine

  • Talks waaay too much!
  • Posts: 2572
  • Sticky Fingers
Re: BALL JOINTS
« Reply #6 on: April 07, 2009, 10:38:21 AM »
If you are not comfortable doing them yourself, talk to brink on here. He is in sylvan, and will do them for you for a reasonable price. Im sure he wouldnt mind you hanging around and observing so you could learn how to do them yourself next time.
Logged
My Mechanic Calgary
Mobile Auto Care
403-483-1083
[email protected]

Offline LifesGrand

  • UberWheeler
  • Posts: 364
Re: BALL JOINTS
« Reply #7 on: April 07, 2009, 10:59:09 AM »
Quote from: Bnine on April 07, 2009, 10:38:21 AM
If you are not comfortable doing them yourself, talk to brink on here. He is in sylvan, and will do them for you for a reasonable price. Im sure he wouldnt mind you hanging around and observing so you could learn how to do them yourself next time.

Or, our other good friend...     LEMON-AID JAY
But Bnine is correct, I know for myself, all I need to do is watch someone the first time & then I'm on my way...
Logged
95 ZJ v8 Ltd.

I called the number on the T.V. set & turned my gold in for cash....

Offline Bnine

  • Talks waaay too much!
  • Posts: 2572
  • Sticky Fingers
Re: BALL JOINTS
« Reply #8 on: April 07, 2009, 01:09:03 PM »
Jays a bit out of the way for a red deer guy. Hence the Brink recommedation ;)
Logged
My Mechanic Calgary
Mobile Auto Care
403-483-1083
[email protected]

Offline Rookie

  • CJA Members
  • That CB Yapper
  • Posts: 845
  • build it, break it, rebuild it better
Re: BALL JOINTS
« Reply #9 on: April 07, 2009, 04:28:08 PM »
Quote from: Bnine on April 07, 2009, 01:09:03 PM
Jays a bit out of the way for a red deer guy. Hence the Brink recommedation ;)

Or come and see me in Didsbury if Brink can't fit you in I'll even let you help without charging you extra  :D
Logged
TJ with some stuff
Pages: [1]   Go Up
« previous next »