Calgary Jeep Association

« previous next »
Pages: [1]   Go Down

Author Topic: gear and tier combos  (Read 1429 times)

0 Members and 1 Guest are viewing this topic.

Offline Waytec

  • Talks waaay too much!
  • Posts: 1972
  • not all there
gear and tier combos
« on: April 26, 2009, 11:32:55 PM »
I am looking to get as much info as possible.
I am looking to go to 33x12.5 tiers. I plan on doing some long drives with the XJ (Ft. Mac, Vancouver Island, ACE and possibly back to Ontario). I would like to get the best gear ratio that gives me a good, or as good as can be expected on road as well as off road capabilities. I will also be eventually pulling a trailer with the camping gear and supplies.
Logged
Why does your Jeep say Toyota on it?
The obstacle is the path.

Offline dunl

  • Talks waaay too much!
  • Posts: 1895
    • Red Deer Jeep Packrats
Re: gear and tier combos
« Reply #1 on: April 26, 2009, 11:41:57 PM »
Stock axles? 4.0 engine, as I'm sure I would have heard you complain about a 2.5 by now. :)

I'm thinking 4.10's or even 4.88's with some BFG TA/KO's, or some Yokohoma Geolanders for street driving (just put a set on the dodge....nice smooth ride, good traction).

 
Logged
`48 CJ2A, `54 CJ3B, `97 TJ, and 03 WJ...batting close to .500 when it comes to jeep models owned vs. jeep models created.....
Red Deer Jeep Packrats
www.reddeerjeep.com

Offline Waytec

  • Talks waaay too much!
  • Posts: 1972
  • not all there
Re: gear and tier combos
« Reply #2 on: April 26, 2009, 11:46:40 PM »
Oh ya I have a 4.0L. D30 front, C8.25 in the rear and both are going to be built and trusted by Brink or DSO what ever name gets cut into the metal. 

4.88 will not fit into the C8.25.
Logged
Why does your Jeep say Toyota on it?
The obstacle is the path.

Offline dunl

  • Talks waaay too much!
  • Posts: 1895
    • Red Deer Jeep Packrats
Re: gear and tier combos
« Reply #3 on: April 26, 2009, 11:49:42 PM »
Nope....so I guess you're not changing axles then?
Logged
`48 CJ2A, `54 CJ3B, `97 TJ, and 03 WJ...batting close to .500 when it comes to jeep models owned vs. jeep models created.....
Red Deer Jeep Packrats
www.reddeerjeep.com

Offline WhiteOut

  • Talks waaay too much!
  • Posts: 1885
Re: gear and tier combos
« Reply #4 on: April 27, 2009, 12:51:05 AM »
I think 4.10 would be ok.  They come stock on JK's and have to spin 32's
Logged

Offline BlackYJ

  • Talks waaay too much!
  • Posts: 3392
    • http://www3.telus.net/ccjc/page0002.html
Re: gear and tier combos
« Reply #5 on: April 27, 2009, 07:11:16 AM »
I have 4.10s will my 33s in my YJ and it does decent on the highway.  I can usually cruise at about 110-115 km/h on the highway, that the 4.10s did decent offroad as well.  The 4.56s will give you more power on the highway and of course a better crawl ratio, but your engine will be running at a higher rpm on the highway.  Talk to blair as he is running 4.88s in his TJ with 33s.
Logged
'95 YJ with a few mods

Offline cLAY

  • Talks waaay too much!
  • Posts: 2377
Re: gear and tier combos
« Reply #6 on: April 27, 2009, 07:31:18 AM »
If you are going to tow ANYTHING go as low as you can, 4.56 or 4.88.
Logged
..

'93 ZJ, 5.2L, lifted/locked/36s..<gone>
'98 5.9er 4.10s,locked,LA,WJ knuckles

Offline JackstandJohnny

  • Talks waaay too much!
  • Posts: 4727
  • where Jeeps go to die
Re: gear and tier combos
« Reply #7 on: April 27, 2009, 08:38:21 AM »
Quote from: cLAY on April 27, 2009, 07:31:18 AM
If you are going to tow ANYTHING go as low as you can, 4.56 or 4.88.

x2 buddy
in my old ford i went from 3.07 gears to 4:56s runnin 33s....... i actually loved it. didn't need first gear but i could actually use 5th on the highway.... good trade i think plus u'll like it way  more on the trail
Logged
~ rescue green JKUR on 35s.  typical rubicon build

Offline Spinalguy

  • Talks waaay too much!
  • Posts: 2759
    • http://www.spinalguy.com
Re: gear and tier combos
« Reply #8 on: April 27, 2009, 08:51:57 AM »
Quote from: cLAY on April 27, 2009, 07:31:18 AM
If you are going to tow ANYTHING go as low as you can, 4.56 or 4.88.
x3
Logged
sent from my old school rotary dial phone.

Offline TJ54

  • Talks waaay too much!
  • Posts: 1689
    • http://community.webshots.com/user/tj54jeep
Re: gear and tier combos
« Reply #9 on: April 27, 2009, 09:29:14 AM »
Quote from: cLAY on April 27, 2009, 07:31:18 AM
If you are going to tow ANYTHING go as low as you can, 4.56 or 4.88.

x4

btw correct spelling is tyre  ;)
Logged
I used to have an open mind but my brains kept falling out.

Offline dunl

  • Talks waaay too much!
  • Posts: 1895
    • Red Deer Jeep Packrats
Re: gear and tier combos
« Reply #10 on: April 27, 2009, 09:32:17 AM »
Quote from: TJ54 on April 27, 2009, 09:29:14 AM
btw correct spelling is tyre  ;)

I beg to differ.  Everone know that the way we say and spell things is the correct way.....


Otherwise you guys wouldn't sound like us when you sing.   8)
Logged
`48 CJ2A, `54 CJ3B, `97 TJ, and 03 WJ...batting close to .500 when it comes to jeep models owned vs. jeep models created.....
Red Deer Jeep Packrats
www.reddeerjeep.com

Offline Bnine

  • Talks waaay too much!
  • Posts: 2572
  • Sticky Fingers
Re: gear and tier combos
« Reply #11 on: April 27, 2009, 10:04:15 AM »
4.56 is as low as a 8.25 will go, and its the ratio you want.
Logged
My Mechanic Calgary
Mobile Auto Care
403-483-1083
[email protected]
Pages: [1]   Go Up
« previous next »