Calgary Jeep Association

« previous next »
Pages: [1]   Go Down

Author Topic: MML to KILL VIBES  (Read 716 times)

0 Members and 1 Guest are viewing this topic.

Offline Jrama

  • That CB Yapper
  • Posts: 923
MML to KILL VIBES
« on: November 05, 2009, 09:32:12 PM »
 TJ 3" lift right now with a T Case drop. Does anybody have opinions on what a 1" mml will do to potentially  get rid of the drop? I have dana 44 in the rear if that makes any difference.
Logged

Offline Bnine

  • Talks waaay too much!
  • Posts: 2572
  • Sticky Fingers
Re: MML to KILL VIBES
« Reply #1 on: November 06, 2009, 09:31:31 AM »
Adjustable uppers would more then likely be required as well.
Logged
My Mechanic Calgary
Mobile Auto Care
403-483-1083
[email protected]

Offline Jrama

  • That CB Yapper
  • Posts: 923
Re: MML to KILL VIBES
« Reply #2 on: November 07, 2009, 08:04:21 AM »
Thats a good point and something I didn't  think of until you mentioned it. 
Just to make sure i got things straight, the adjustable upper arms would be used to help point the pinion up, matching the t-case more less ?

about $200  for adj uppers
roughly $200  for bl and mml

SYE and drive shaft cost 600-700?
unless i can find one used
Logged

Offline Rubi03 jef

  • Talks waaay too much!
  • Posts: 1918
  • she never understands
Re: MML to KILL VIBES
« Reply #3 on: November 10, 2009, 09:59:36 PM »
roll the diff up a bit and you should be fine

the mml list will just make it a bit better
Logged
04 rubicon <4'' X series RC lift, 1.25'' RC body lift, 1'' RC MML, CV rear drive shaft,  Stubby front bumper, CB,35 MTZ" ,Hi Lifter 54'',LED tail lights , flat fenders, LED front Flasher, half doors, Light force spots, and CDN M101 custom Military trailer
Pages: [1]   Go Up
« previous next »