Calgary Jeep Association

Author Topic: Torsen Diff in Rubis - Learned something new tonight  (Read 922 times)

0 Members and 1 Guest are viewing this topic.

Offline Tinkerer

  • UberWheeler
  • Posts: 313
    • My (OLD OLD OLD) website
Torsen Diff in Rubis - Learned something new tonight
« on: December 14, 2009, 08:27:34 PM »
 ???
« Last Edit: April 23, 2010, 12:06:45 PM by Tinkerer »
2004 TJ Rubicon 2.5" Cage Puck Lift
LT285/75R15 Trxus MT's
ARB Bullbar and Warn XD9000i winch
Garvin Wilderness Swingaway Rack
Cobra 75WXST CB, Yaesu FT8900 Ham
VE6PDB - usually on VE6RYC

Offline morerpmfred

  • Talks waaay too much!
  • Posts: 1604
Re: Torsen Diff in Rubis - Learned something new tonight
« Reply #1 on: December 14, 2009, 09:25:05 PM »
Those torsen or torsen gleason diffs work awesome. In the early 80's you could buy them for pretty much any 4wd . they work just like a truetrac [ less bias ]but way better. It is my understanding that it is in the rear only of the new rubicons as well as the rear of the dodge power wagons. It is not in the transfer case though a 242 has viscous coupler. Some of the newer mitsu ,Audis and toyota AWD cars have them in the transfer case. Works really well with an auto as you can brake modulate esp going over rocks or of camber terrain

Offline rocnrol

  • Baby Wheeler
  • Posts: 81
Re: Torsen Diff in Rubis - Learned something new tonight
« Reply #2 on: December 24, 2009, 08:44:06 AM »
wow, its funny how the old has become new again. that is an old and yet effective trick to get any limited slip to work. i ran a clutch possi for MANY years, and whenever i was losing some traction, just a little brake application was all that was needed to get moving again. ;)