Bright light indicator?

[Justink]

Have a '91 cherokee laredo, every  dash light works, except the high beam indicator.  I pulled the whole dash apart and the circuit panel near where the high beam light  "plugs in" seems to not be sticking down.  Tried a new light already.
 Any suggestions? As I am tired of being "that guy who forgets to dim his lights".

[Bigg Rudd]

Does it have a daytime running light module (DRL)? This is what makes your headlights stay on during the day. When this module dies it will keep your headlights on all the time, even when the vehicle is off. The way people get around this is by unplugging the module but you will lose your high beam indicator.

[Justink]

pretty sure it doesn't have a DRL.  If it did were would it be located?

[Bigg Rudd]

Not sure on My TJ it was on the firewall. I got one at PNP from a Dodge Van it was by the battery. I would think a google search might help you out on this one.

[SwampSinger]

pretty sure it doesn't have a DRL.  If it did were would it be located?

Passenger side  corner  on the fender...

Mine got so hot it almost caught on fire .... take that crap off or replace it right way. Next ...your head light will  stay on and it might burn your Jeep down

[parabs]

pretty sure it doesn't have a DRL.  If it did were would it be located?

transport canada mandated all vehicles sold in canada after model year 1989 have DRL installed from the factory.  your 91 has/had them.

[Justink]

transport canada mandated all vehicles sold in canada after model year 1989 have DRL installed from the factory.  your 91 has/had them.

I stand corrected , thanks for that information I will be checking that out as soon as the Jeep is back from the windshield place

[Justink]

So my jeep does not have a DRL.  it has the input like stated.  Where would I go about picking one of these module up?  Rather not go to a stealership and the guy at crappy tire says they don't have them. 

[morerpmfred]

I removed my drl module when i rewired my headlights to run the 100 watt high beams and the drl would put the lightd on high all the time. So i jumped the terminal pictured in swampsingers hand with one wire so the the high beam indicator would come on. Can not remember witch terminal it was  but both where one of the smaller ones. There was a little trial an error setting it all up with a test light to get it to work.

[Justink]

I removed my drl module when i rewired my headlights to run the 100 watt high beams and the drl would put the lightd on high all the time. So i jumped the terminal pictured in swampsingers hand with one wire so the the high beam indicator would come on. Can not remember witch terminal it was  but both where one of the smaller ones. There was a little trial an error setting it all up with a test light to get it to work.

Awesome idea  , worked like a charm.  It was the bottom right small one and the bottom left large one.

[Bigg Rudd]

I have got to try this out! Woo Hoo new mod!

[Justink]

So after splicing those wires my speedometer doesn't seem to work?

[Justink]

So after splicing those wires my speedometer doesn't seem to work?

Whoops the spline on the speedo reader on th e transfer case was stripped