Calgary Jeep Association

« previous next »
Pages: [1]   Go Down

Author Topic: Front License Plate mounting  (Read 3769 times)

0 Members and 1 Guest are viewing this topic.

Offline FirstTimer

  • That CB Yapper
  • Posts: 717
  • Gettin there!
Front License Plate mounting
« on: November 19, 2010, 10:35:32 AM »
This is kind of a lame questions and not really "tech related" but does anyone know how to mount a license plate on the stock front bumper of an 02 TJ.  I tried with a basic screw, but because there is no threading and its basically impossible to get a nut inside the bumper tube I am at a loss.

Any advice would be great!

Thanks
Logged
02' Black TJ Apex on 33s, 2.5"  OME HD lift, Currie JJ CA on all four corners, 4:10 axles, Husky-Liner Rear Swing-Away Bumper and Bushwackers Flat Flares.

Offline Tagg

  • Budget Lift
  • Posts: 175
Re: Front License Plate mounting
« Reply #1 on: November 19, 2010, 10:43:51 AM »
Aren't there those nylon inserts that just push into the bumper?  Available at Canadian Tire.
Logged
08 Rubicon

Offline Knox

  • That CB Yapper
  • Posts: 649
Re: Front License Plate mounting
« Reply #2 on: November 19, 2010, 11:11:04 AM »
maybe get ahold of Jenssen, his new jeep from Ont/BC had a front plate on it iirc, maybe he doesn't need what ever was holding it there before?
Logged
2003 TJ
"Your TJ has the aerodynamics of a brick"
"if you lose the stick, chances are you'll lose the jeep......"

Offline FirstTimer

  • That CB Yapper
  • Posts: 717
  • Gettin there!
Re: Front License Plate mounting
« Reply #3 on: November 19, 2010, 03:43:41 PM »
Perfect! Thanks!  I will be stopping at Canadian tire!
Logged
02' Black TJ Apex on 33s, 2.5"  OME HD lift, Currie JJ CA on all four corners, 4:10 axles, Husky-Liner Rear Swing-Away Bumper and Bushwackers Flat Flares.

Offline SwampSinger

  • CJA Members
  • Talks waaay too much!
  • Posts: 6172
  • Baconator
    • mmmmm-bacon
Re: Front License Plate mounting
« Reply #4 on: November 19, 2010, 05:04:58 PM »
PL400  ;D
Logged

Offline Knox

  • That CB Yapper
  • Posts: 649
Re: Front License Plate mounting
« Reply #5 on: November 19, 2010, 05:18:16 PM »
heh we were just talking about that, but it's all about the upgraded pl9000 :)
Logged
2003 TJ
"Your TJ has the aerodynamics of a brick"
"if you lose the stick, chances are you'll lose the jeep......"

Offline specialk

  • CJA Executive
  • Talks waaay too much!
  • Posts: 3176
Re: Front License Plate mounting
« Reply #6 on: November 19, 2010, 07:50:12 PM »
Quote from: SwampSinger on November 19, 2010, 05:04:58 PM
PL400  ;D

X2 or drill hole ->get bolt, nut and washers...
Logged
04 TJ Rubi

Offline Gearhead

  • Talks waaay too much!
  • Posts: 1161
Re: Front License Plate mounting
« Reply #7 on: November 20, 2010, 07:30:34 AM »
Logged

Offline FirstTimer

  • That CB Yapper
  • Posts: 717
  • Gettin there!
Re: Front License Plate mounting
« Reply #8 on: November 20, 2010, 09:07:13 AM »
Im assuming pl9000 is some kind of glue? Like the olds red green duct tape idea too, very classy!
Logged
02' Black TJ Apex on 33s, 2.5"  OME HD lift, Currie JJ CA on all four corners, 4:10 axles, Husky-Liner Rear Swing-Away Bumper and Bushwackers Flat Flares.

Offline nickcoleman9

  • Baby Wheeler
  • Posts: 77
Re: Front License Plate mounting
« Reply #9 on: November 20, 2010, 09:45:23 AM »
drill a hole and install a rivnut then bolt it on, or use a sheet metal screw.
Logged

Offline Spinalguy

  • Talks waaay too much!
  • Posts: 2759
    • http://www.spinalguy.com
Re: Front License Plate mounting
« Reply #10 on: November 22, 2010, 04:52:58 PM »
Quote from: nickcoleman9 on November 20, 2010, 09:45:23 AM
drill a hole and install a rivnut then bolt it on, or use a sheet metal screw.
Nick is great at rivnuts and they are awesome and easy.
Logged
sent from my old school rotary dial phone.

Offline dubbleJs

  • Talks waaay too much!
  • Posts: 1330
Re: Front License Plate mounting
« Reply #11 on: November 22, 2010, 06:05:46 PM »
Just pulled some plastic inserts out of a TJ bumper this weekend, they just clip right into the bumper holes and accept screws.
Logged
'91 XJ - 3" procrap - cutout for 33" MT's  - More and more dents every run...Sold.
'98 XJ - Lifted, locked and lovin' it

Offline WagoneerXJ

  • Talks waaay too much!
  • Posts: 1363
  • Bagon Wagon!
Re: Front License Plate mounting
« Reply #12 on: November 23, 2010, 07:57:42 AM »
I already had the bumper off, so I used somr grade 8 hardware from the bolt bin. Overkill? YES
Logged
98 XJ Sport 2 Dr, 3", 33's and Bushwacker Flat Flares
87 XJ Wagoneer 5", Dana 44, 34" Swamper TSL's
97 TJ 5.2 Magnum V8 swap, 4" and 33" MTZ's- GF's Jeep
84 Mustang GT-Built 351W 5spd
97 XJ - 3.5", 31" BFG. 370,000 KMS and counting!
Pages: [1]   Go Up
« previous next »