Calgary Jeep Association

« previous next »
Pages: [1]   Go Down

Author Topic: where to get grade 8 bolts  (Read 1787 times)

0 Members and 1 Guest are viewing this topic.

Offline Maverick

  • Winch Wench
  • Posts: 35
where to get grade 8 bolts
« on: April 17, 2011, 09:01:28 PM »
Hey guys, anyone know a place to get graded hardware in the Southwest...I need some longer bolts to get my winch on my rig.  Thanks
Logged

Offline w squared

  • Talks waaay too much!
  • Posts: 3400
  • Keamy Hungry!
Re: where to get grade 8 bolts
« Reply #1 on: April 17, 2011, 09:16:22 PM »
Gregg's Distributor's or Bolt Supply House.
Logged
Quote from: TL-Iguana on December 08, 2011, 09:55:33 PM
I followed a rainbow out to a garage and found a leprichaun. The rainbow ended in a potted cactus on his porch, but there was no gold :(

Offline TL-Iguana

  • Talks waaay too much!
  • Posts: 1117
  • XJ - The Official TJ Rescue Vehicle
Re: where to get grade 8 bolts
« Reply #2 on: April 17, 2011, 10:59:14 PM »
If their metric thread about the only place with any selection is Quest Industrial on 12th st, kitty corner to the Burger Bus.
Logged
I did a Google search for "hot trannies" but nothing came up about oil coolers  :o

Worrying too much about mpg with a Jeep is similar to worrying about your sister's virginity. An ok thing to be concerned about but...

'01 XJ on 35s, '11 Jk DD

Offline BlackAura

  • Budget Lift
  • Posts: 245
  • 2003 TJ Rubicon (Stock)
Re: where to get grade 8 bolts
« Reply #3 on: April 18, 2011, 04:12:36 PM »
Quote from: w squared on April 17, 2011, 09:16:22 PM
Bolt Supply House.

Grabbed mine from here, no problems.  They had the metric bolt required to replace the swaybar torx bolts. (and I would assume most others you might require).
Logged
BlackAura (Kevin)
Migrated to Seattle for a while.

Offline SwampSinger

  • CJA Members
  • Talks waaay too much!
  • Posts: 6172
  • Baconator
    • mmmmm-bacon
Re: where to get grade 8 bolts
« Reply #4 on: April 18, 2011, 04:18:57 PM »
Quote from: tliguana on April 17, 2011, 10:59:14 PM
If their metric thread about the only place with any selection is Quest Industrial on 12th st, kitty corner to the Burger Bus.

on 11th  ;)
Logged

Offline TL-Iguana

  • Talks waaay too much!
  • Posts: 1117
  • XJ - The Official TJ Rescue Vehicle
Re: where to get grade 8 bolts
« Reply #5 on: April 18, 2011, 04:34:48 PM »
Thanks Dom :)

Yes 11th

They were the only place that had the m12x100 I needed. Bolt supply looked at me funny when i asked for a grade 10.9 or 12.5  ::)
Logged
I did a Google search for "hot trannies" but nothing came up about oil coolers  :o

Worrying too much about mpg with a Jeep is similar to worrying about your sister's virginity. An ok thing to be concerned about but...

'01 XJ on 35s, '11 Jk DD
Pages: [1]   Go Up
« previous next »