Calgary Jeep Association

Author Topic: Best Location To Mount 48 Inch Hi Lift  (Read 1389 times)

0 Members and 2 Guests are viewing this topic.

Offline duncan-d

  • Baby Wheeler
  • Posts: 90
Best Location To Mount 48 Inch Hi Lift
« on: January 25, 2012, 07:20:20 PM »
I have a stock 2006 Jeep Rubicon with a front bush/rock guard with a Warn winch. I recently purchased a 48 inch Hi Lift. I am looking for the best location to mount the Hi lift. Front bumper, rear bumper or on the front bush/rock guard (1 1/2 tubing). Please let me know your thoughts.

Offline Rubi03 jef

  • Talks waaay too much!
  • Posts: 1918
  • she never understands
Re: Best Location To Mount 48 Inch Hi Lift
« Reply #1 on: January 25, 2012, 08:30:32 PM »
from what i have been told mounting that thing on the exterior of the truck is just pointless .. gets full of mud and doesnt work when you need it ..  i managed to fit mine in the back of the jeep and attached to both C pillars in the jeep   that way its out of the way and clean and dry and ready to be used
 
04 rubicon <4'' X series RC lift, 1.25'' RC body lift, 1'' RC MML, CV rear drive shaft,  Stubby front bumper, CB,35 MTZ" ,Hi Lifter 54'',LED tail lights , flat fenders, LED front Flasher, half doors, Light force spots, and CDN M101 custom Military trailer

Offline NoBiggies

  • Winch Wench
  • Posts: 39
Re: Best Location To Mount 48 Inch Hi Lift
« Reply #2 on: January 25, 2012, 09:19:16 PM »
I mounted mine on my hood just infront of the hinges. Using to rubber bump stops from princess auto and an two bolts. Costs me a hole 6 bucks. Not even.

Offline binare

  • That CB Yapper
  • Posts: 771
Re: Best Location To Mount 48 Inch Hi Lift
« Reply #3 on: January 25, 2012, 09:59:18 PM »
Mount it outside if you bought it for looks, mount it inside if you actually want to use it... which will be never to rarely.

Offline tubby

  • Talks waaay too much!
  • Posts: 1349
  • Life's too short for a fulltime job
Re: Best Location To Mount 48 Inch Hi Lift
« Reply #4 on: January 25, 2012, 10:05:25 PM »
from what i have been told mounting that thing on the exterior of the truck is just pointless .. gets full of mud and doesnt work when you need it .

Hi-Lift sells a neoprene booty for $35(at Princess Auto) that mounts around the ratcheting mechanism to keep the elements out, and a rubber collar can be purchased from Daystar to clamp around the rail and handle to prevent rattling. I've mounted my Hi-Lift on 4 different rigs (outside) spanning 18 years and it works just fine.
Lockers
Cuz ya can't kick arse with only one leg

Offline NoBiggies

  • Winch Wench
  • Posts: 39
Re: Best Location To Mount 48 Inch Hi Lift
« Reply #5 on: January 25, 2012, 10:40:35 PM »
Hi-Lift sells a neoprene booty for $35(at Princess Auto) that mounts around the ratcheting mechanism to keep the elements out, and a rubber collar can be purchased from Daystar to clamp around the rail and handle to prevent rattling. I've mounted my Hi-Lift on 4 different rigs (outside) spanning 18 years and it works just fine.

That's what I have and honestly works perfect and people have been doing it for years.
Oh almost for got the best part. Cheap cheap.

Offline NoBiggies

  • Winch Wench
  • Posts: 39
Re: Best Location To Mount 48 Inch Hi Lift
« Reply #6 on: January 26, 2012, 09:18:37 AM »
And I can email pictures of you'd like to see the design.

Offline TL-Iguana

  • Talks waaay too much!
  • Posts: 1117
  • XJ - The Official TJ Rescue Vehicle
Re: Best Location To Mount 48 Inch Hi Lift
« Reply #7 on: January 26, 2012, 11:02:58 AM »
That's what I have and honestly works perfect and people have been doing it for years.
Oh almost for got the best part. Cheap cheap.

x3

Had my original 48" on the roof of my XJ in all weather with the boot and had no issues. Now have a bigger one and still no issues. The 48 is now on a TJ and still no issues. Had it over 6 years in the weather, and as long as you take care of it, as in lube the pins with anti sieze and keep the boot on, it should never give you grief.
I did a Google search for "hot trannies" but nothing came up about oil coolers  :o

Worrying too much about mpg with a Jeep is similar to worrying about your sister's virginity. An ok thing to be concerned about but...

'01 XJ on 35s, '11 Jk DD

Offline FirstTimer

  • That CB Yapper
  • Posts: 717
  • Gettin there!
Re: Best Location To Mount 48 Inch Hi Lift
« Reply #8 on: January 26, 2012, 11:16:48 AM »
I did what Rubi03Jef suggested and mounted mine across the back on the C pillars.  Works Great!  Also, if you are planning on doing any winter  it'll keep in nice and warm inside and you won't have to freeze trying to get it dismounted from whaterver exterior mount you have.
Left side;

Right side;
02' Black TJ Apex on 33s, 2.5"  OME HD lift, Currie JJ CA on all four corners, 4:10 axles, Husky-Liner Rear Swing-Away Bumper and Bushwackers Flat Flares.

Offline Bnine

  • Talks waaay too much!
  • Posts: 2572
  • Sticky Fingers
Re: Best Location To Mount 48 Inch Hi Lift
« Reply #9 on: January 26, 2012, 01:14:00 PM »
On your garage wall.
My Mechanic Calgary
Mobile Auto Care
403-483-1083
[email protected]

Offline binare

  • That CB Yapper
  • Posts: 771
Re: Best Location To Mount 48 Inch Hi Lift
« Reply #10 on: January 26, 2012, 04:40:24 PM »
On your garage wall.

Thats where it'll end up. Mines about 9 years old and still looks brand new :-)