Calgary Jeep Association

« previous next »
Pages: [1]   Go Down

Author Topic: TJ transfer linkage adjustment  (Read 1204 times)

0 Members and 2 Guests are viewing this topic.

Offline dunl

  • Talks waaay too much!
  • Posts: 1895
    • Red Deer Jeep Packrats
TJ transfer linkage adjustment
« on: June 23, 2012, 11:09:43 PM »
My linkage was bent, so I fixed that tonight and hooked everything back up.  Now with a lift, I know that you loosen the bolt, and pull the bar on the linkage to the front.  I still can't get it to go into 4Low. 

Is there something I am doing wrong, or is there a trick to this?

Thanks.
Logged
`48 CJ2A, `54 CJ3B, `97 TJ, and 03 WJ...batting close to .500 when it comes to jeep models owned vs. jeep models created.....
Red Deer Jeep Packrats
www.reddeerjeep.com

Offline WagoneerXJ

  • Talks waaay too much!
  • Posts: 1363
  • Bagon Wagon!
Re: TJ transfer linkage adjustment
« Reply #1 on: June 23, 2012, 11:45:20 PM »
I've got the same problem in my 97 TJ with a 2" bodylift. Haven't figured it out yet.
Logged
98 XJ Sport 2 Dr, 3", 33's and Bushwacker Flat Flares
87 XJ Wagoneer 5", Dana 44, 34" Swamper TSL's
97 TJ 5.2 Magnum V8 swap, 4" and 33" MTZ's- GF's Jeep
84 Mustang GT-Built 351W 5spd
97 XJ - 3.5", 31" BFG. 370,000 KMS and counting!

Offline Slewfoot

  • UberWheeler
  • Posts: 304
Re: TJ transfer linkage adjustment
« Reply #2 on: June 24, 2012, 12:48:46 AM »
http://www.novak-adapt.com/catalog/kit_sk2x.htm 8)

Jay at Chanda is a Novak dealer - give him a call. :)
Logged
2006 Rubicon LJ (Unlimited) Mostly Stock
Pages: [1]   Go Up
« previous next »