Calgary Jeep Association

« previous next »
Pages: [1]   Go Down

Author Topic: tire bead sealer  (Read 2713 times)

0 Members and 6 Guests are viewing this topic.

Offline JackstandJohnny

  • Talks waaay too much!
  • Posts: 4727
  • where Jeeps go to die
tire bead sealer
« on: May 10, 2013, 12:11:38 PM »
where can i pick some up in Calgary? don't need much.

one of my tires is leaking at the bead but no dents in the rims or anything like that. just want to pop the bead, seal it up.  yes its on an aluminum wheel too

i've called three tire places and auto value. nobody carries it.  guessing i'll have to buy a gallon from Acklands or something lol

thanks
« Last Edit: May 10, 2013, 12:35:37 PM by JackstandJohnny »
Logged
~ rescue green JKUR on 35s.  typical rubicon build

Offline esi

  • That CB Yapper
  • Posts: 633
Re: tire bead sealer
« Reply #1 on: May 10, 2013, 01:36:09 PM »
wallyworld has slime. Or get a tube of accoustic sealant. It won't dry like silicone and should seal.
Logged
Formerly of Boots & Boost Inc
Back farming and fabricating again.

Offline BUKI

  • Talks waaay too much!
  • Posts: 1197
  • Project Fugly
Re: tire bead sealer
« Reply #2 on: May 10, 2013, 02:05:15 PM »
Pop the bead and take a wire wheel to the inside of the rim to remove that oxidation. Re seat the bead it should take the leak away. Another thing, (Andy does this) is use rubber cement around the bead. I think it's like a poor mans bead lock  ;)
Logged

Offline JackstandJohnny

  • Talks waaay too much!
  • Posts: 4727
  • where Jeeps go to die
Re: tire bead sealer
« Reply #3 on: May 10, 2013, 02:21:13 PM »
Quote from: esi on May 10, 2013, 01:36:09 PM
wallyworld has slime. Or get a tube of accoustic sealant. It won't dry like silicone and should seal.

whats accoustic sealant Dale?

silicone bad to use?
Logged
~ rescue green JKUR on 35s.  typical rubicon build

Offline 78ram

  • Baby Wheeler
  • Posts: 59
Re: tire bead sealer
« Reply #4 on: May 10, 2013, 03:39:40 PM »
I have bead sealant at home I bought it from auto value a few yrs ago used it on my swampers
If your close to 52&17 ave se I can help u out.......
« Last Edit: May 10, 2013, 03:44:58 PM by 78ram »
Logged

Offline binare

  • That CB Yapper
  • Posts: 771
Re: Re: Re: tire bead sealer
« Reply #5 on: May 10, 2013, 03:45:03 PM »
Quote from: BUKI on May 10, 2013, 02:05:15 PM
Pop the bead and take a wire wheel to the inside of the rim to remove that oxidation. Re seat the bead it should take the leak away. Another thing, (Andy does this) is use rubber cement around the bead. I think it's like a poor mans bead lock  ;)

X2 usually solves the problem, cheapo wire wheel on a drill and your done.
Logged

Offline esi

  • That CB Yapper
  • Posts: 633
Re: tire bead sealer
« Reply #6 on: May 10, 2013, 04:08:33 PM »
Quote from: JackstandJohnny on May 10, 2013, 02:21:13 PM
whats accoustic sealant Dale?

silicone bad to use?
silicone will seal it really well. And make it a massive PIA to get off. Acoustic sealant is used in construction. Black crap that doesn't dry should work but a wire wheel might solve the problem. If you want to take a drive I can deal with it.
Logged
Formerly of Boots & Boost Inc
Back farming and fabricating again.

Offline JackstandJohnny

  • Talks waaay too much!
  • Posts: 4727
  • where Jeeps go to die
Re: tire bead sealer
« Reply #7 on: May 10, 2013, 10:00:58 PM »
Thanks gents. I'm gonna give the accoustic stuff a try: picked some up tonite. If it doesn't work Dale i will load up the ZJ and come visit :)
Logged
~ rescue green JKUR on 35s.  typical rubicon build

Offline cLAY

  • Talks waaay too much!
  • Posts: 2377
Re: tire bead sealer
« Reply #8 on: May 10, 2013, 10:23:37 PM »
NAPA carries bead sealer.
Logged
..

'93 ZJ, 5.2L, lifted/locked/36s..<gone>
'98 5.9er 4.10s,locked,LA,WJ knuckles

Offline JackstandJohnny

  • Talks waaay too much!
  • Posts: 4727
  • where Jeeps go to die
Re: tire bead sealer
« Reply #9 on: May 11, 2013, 10:57:13 PM »
Popped the bead: it was dirty as hell lots of mud and crud in there. Cleaned it out and popped the need back on. All good now no leaks :).
Logged
~ rescue green JKUR on 35s.  typical rubicon build
Pages: [1]   Go Up
« previous next »