Calgary Jeep Association

« previous next »
Pages: [1]   Go Down

Author Topic: Where to get 5.13 gears put in?  (Read 2661 times)

0 Members and 1 Guest are viewing this topic.

Offline JKaJayF

  • Winch Wench
  • Posts: 27
Where to get 5.13 gears put in?
« on: November 18, 2014, 12:57:05 PM »
Looking to put 5.13's and lockers on my 07 JKU. Where is the best place to go for a NO worries and NO going back finish a job that was not done right the first time. Any info would be great. Thanks 8)
Logged
follow the gravel....
2.5" Old Man Emu heavy kit
37’s
XRC front & rear with 10000 X2O winch

Offline Dingleberry

  • UberWheeler
  • Posts: 450
Re: Where to get 5.13 gears put in?
« Reply #1 on: November 18, 2014, 02:38:39 PM »
See Dave and Eric at Broken Axle, Eric installed the gears and locker in my 9" a couple of years ago and I've never had a problem since!
Logged

Offline BUKI

  • Talks waaay too much!
  • Posts: 1197
  • Project Fugly
Re:
« Reply #2 on: November 18, 2014, 11:38:34 PM »
X2. Now issues here.
Logged

Offline GiS

  • That CB Yapper
  • Posts: 641
Re: Where to get 5.13 gears put in?
« Reply #3 on: November 19, 2014, 12:53:12 PM »
Bill or Bnine on the board here has been helping members for years and years, including gearsets.

I'd send him a PM and ask,

Joey
Logged

Offline EEP

  • UberWheeler
  • Posts: 328
Re: Where to get 5.13 gears put in?
« Reply #4 on: November 19, 2014, 06:42:35 PM »
X3 for Broken Axle, did my lockers and gears for my XJ, no issues,
« Last Edit: November 19, 2014, 06:44:30 PM by EEP »
Logged
01 XJ, RE 3.5" lift, Smittybilt XRC front & rear bumper, X2O 8,000 lb winch, 33" MT/R's
, ARB snorkel, lockers and a bunch of other stuff
06 TJ, 2" lift, 31" Goodyear Territory's.
14 JKU, wife's urban 4X4.

Offline SwampSinger

  • CJA Members
  • Talks waaay too much!
  • Posts: 6172
  • Baconator
    • mmmmm-bacon
Re: Where to get 5.13 gears put in?
« Reply #5 on: November 19, 2014, 07:32:58 PM »
Quote from: GiS on November 19, 2014, 12:53:12 PM
Bill or Bnine on the board here has been helping members for years and years, including gearsets.

I'd send him a PM and ask,

Joey

He's the Master Yoda of gears setup
Logged

Offline JKaJayF

  • Winch Wench
  • Posts: 27
Re: Where to get 5.13 gears put in?
« Reply #6 on: November 21, 2014, 03:40:37 PM »
Thanks guys!
Logged
follow the gravel....
2.5" Old Man Emu heavy kit
37’s
XRC front & rear with 10000 X2O winch

Offline Black Betty

  • UberWheeler
  • Posts: 453
Re: Where to get 5.13 gears put in?
« Reply #7 on: November 22, 2014, 06:50:14 AM »
Either Bnine or Broken axle would be good choices.
Logged
06 wk-soccer mom mobile aka Betty J
99 xj- Black Betty, 2" OME lift
94 yj- needs to be lifted aka Betty Rubble

Stupid hurts

Offline Ratchetstrap

  • Winch Wench
  • Posts: 22
Re: Where to get 5.13 gears put in?
« Reply #8 on: November 22, 2014, 11:28:58 PM »
Any feed back about the Gear Center?
Logged

Offline TL-Iguana

  • Talks waaay too much!
  • Posts: 1117
  • XJ - The Official TJ Rescue Vehicle
Re: Where to get 5.13 gears put in?
« Reply #9 on: November 23, 2014, 07:15:05 PM »
Quote from: Ratchetstrap on November 22, 2014, 11:28:58 PM
Any feed back about the Gear Center?


Expensive.
Logged
I did a Google search for "hot trannies" but nothing came up about oil coolers  :o

Worrying too much about mpg with a Jeep is similar to worrying about your sister's virginity. An ok thing to be concerned about but...

'01 XJ on 35s, '11 Jk DD

Offline Dingleberry

  • UberWheeler
  • Posts: 450
Re: Where to get 5.13 gears put in?
« Reply #10 on: November 24, 2014, 09:20:20 PM »
Burned me twice (gave them a second chance, and they STILL overcharged me and wouldn't cover under warranty).

-1 for Gear Centre/Pats Driveline
Logged
Pages: [1]   Go Up
« previous next »