Calgary Jeep Association

« previous next »
Pages: [1]   Go Down

Author Topic: transfer case question  (Read 1352 times)

0 Members and 1 Guest are viewing this topic.

Offline pooljunky

  • That CB Yapper
  • Posts: 563
transfer case question
« on: November 29, 2014, 02:12:50 AM »
Ok so my transfer case chain is biding on the shaft for some reason. but I have a 2.5l transfer case same type. if i take the input shaft from the one i had and put it on the one I have in the 4.0l should it work?
Logged

Offline vantagetes

  • That CB Yapper
  • Posts: 947
  • Edmonton Trail Rated
Re: transfer case question
« Reply #1 on: November 30, 2014, 11:23:25 AM »
Your chain is probably stretched, I would look at replacing the chain vs a shaft.
Logged

Offline pooljunky

  • That CB Yapper
  • Posts: 563
Re: transfer case question
« Reply #2 on: November 30, 2014, 11:41:36 AM »
sorry the chain is in good shape and not streched. bought a new chain and that is not where it contacts
Logged

Offline morerpmfred

  • Talks waaay too much!
  • Posts: 1604
Re: transfer case question
« Reply #3 on: November 30, 2014, 03:07:45 PM »
How is the sproket wear? Usually you can change the chain once and it will stretch again. Second chain will not last as long as the first cause of wear on the sproket.  Then change out the sprokets with the chain the second time.
Logged
Pages: [1]   Go Up
« previous next »