Calgary Jeep Association

Author Topic: Need a 2.5l Motor for 2000 TJ  (Read 1502 times)

0 Members and 1 Guest are viewing this topic.

Offline shadowman068

  • Stocker
  • Posts: 4
Need a 2.5l Motor for 2000 TJ
« on: May 14, 2017, 10:37:50 PM »
Hi Guys,
This is my first post on here.  One of the members suggested I ask around.
My daughter has a 2000 TJ and I believe she blew the motor this weekend.  She was driving to work and something went bang.  We had it towed to the house and I checked the compression and the only cylinder that had any was cylinder 1.  Im thinking she may have snapped the crank.  I may pull the oil pan off and see what I can see.  But in the meantime, I thought I would ask around.  Anyone know where to pick up a rebuilt and reasonably priced 2.5l engine?  What should I be paying?  I live in High River.  Anyone local that would be recommended to install?

Thanks for the help!

Offline Bnine

  • Talks waaay too much!
  • Posts: 2572
  • Sticky Fingers
Re: Need a 2.5l Motor for 2000 TJ
« Reply #1 on: May 16, 2017, 11:25:23 AM »
They are hard to find. Im doing one in an 02 right now. I can check the crank in this one coming out for you. See if its worthy or not. Ill have it out this week.
My Mechanic Calgary
Mobile Auto Care
403-483-1083
[email protected]

Offline shadowman068

  • Stocker
  • Posts: 4
Re: Need a 2.5l Motor for 2000 TJ
« Reply #2 on: May 16, 2017, 04:03:06 PM »
I pulled the oil drain plug and got blasted with coolant.  So the block is toast.  There is no rebuild.  I have a bunch of people looking for either a rebuilt or used motor right now,  There is one out in Vancouver for 2400 with 3 year 60k warranty, or a used one out in Onterrible for 1600, no warranty.  Kinda hoping for something a little cheaper and more local. 
Im still trying to weigh if its worth doing or sell the jeep as is and find another.

Offline dubbleJs

  • Talks waaay too much!
  • Posts: 1330
Re: Need a 2.5l Motor for 2000 TJ
« Reply #3 on: May 17, 2017, 12:20:36 AM »
4L's are fairly easy to find... Thought about doing an upgrade?

Sent from my SM-G900W8 using Tapatalk

'91 XJ - 3" procrap - cutout for 33" MT's  - More and more dents every run...Sold.
'98 XJ - Lifted, locked and lovin' it

Offline JENSSEN

  • Talks waaay too much!
  • Posts: 1606
    • Racing For The Cure
Re: Need a 2.5l Motor for 2000 TJ
« Reply #4 on: May 17, 2017, 11:59:55 PM »
4.0 Frames are different,.as is everything else
www.racingforthecure.ca


Definition of Link to this definition of Blasphemy
1. [n] blasphemous behavior; the act of depriving something of its sacred character;

Offline Dingleberry

  • UberWheeler
  • Posts: 450
Re: Need a 2.5l Motor for 2000 TJ
« Reply #5 on: May 20, 2017, 10:10:47 AM »
4L's are fairly easy to find... Thought about doing an upgrade?

Sent from my SM-G900W8 using Tapatalk

4L is actually more of a pain to swap in than a V8 would be. According to fourwheeler.com I think it was. (You have to engineer new motor mounts, completely different engine wiring harness and computer, etc..)