Calgary Jeep Association

« previous next »
Pages: [1]   Go Down

Author Topic: Sway bar tab  (Read 846 times)

0 Members and 1 Guest are viewing this topic.

Offline Extra Crispy

  • Stocker
  • Posts: 3
Sway bar tab
« on: June 16, 2021, 07:26:45 AM »
Hey folks, I have an issue with my sway bar tab being bent, from what I read it's because the sway bar isn't long enough when connected? I bought the Jeep ('15 JKU-S) recently and didn't realize there'd be an issue until it was too late.

What can I do to fix the tab now, budget friendly and not if it matters.

I'm next to useless when it comes to mechanical talent so I'd likely be paying for this.
Logged

Offline hps4evr

  • Administrator
  • Talks waaay too much!
  • Posts: 2959
Re: Sway bar tab
« Reply #1 on: June 16, 2021, 11:55:37 AM »
What do you mean by tab?
Logged
YJ=Y’all Jealous

Offline Extra Crispy

  • Stocker
  • Posts: 3
Re: Sway bar tab
« Reply #2 on: June 16, 2021, 05:23:33 PM »
Where the sway bar link attaches to the axle.
Logged

Offline hps4evr

  • Administrator
  • Talks waaay too much!
  • Posts: 2959
Re: Sway bar tab
« Reply #3 on: June 16, 2021, 11:39:21 PM »
Could probably hammer it straight. But longer links would be needed.
Logged
YJ=Y’all Jealous

Offline Extra Crispy

  • Stocker
  • Posts: 3
Re: Sway bar tab
« Reply #4 on: June 20, 2021, 07:16:44 PM »
Sounds good. How long? Is it dependant on lift? Because I don't know how much of that I have either hahah.

Buying lifted is looking like a nightmare so far.
Logged

Offline hps4evr

  • Administrator
  • Talks waaay too much!
  • Posts: 2959
Re: Sway bar tab
« Reply #5 on: June 21, 2021, 11:45:02 AM »
Quote from: Extra Crispy on June 20, 2021, 07:16:44 PM
Sounds good. How long? Is it dependant on lift? Because I don't know how much of that I have either hahah.

Buying lifted is looking like a nightmare so far.
Typically 10-15 degrees up on the sway bar itself.
And yes, buying a lifted jeep always had surprises.
Logged
YJ=Y’all Jealous
Pages: [1]   Go Up
« previous next »