Where to buy a ball joint removal tool?

[calltrex]

Princess auto is sold out.

where else can u get a ball joint removal kit?

[Vinman]

I got one from PA I'll sell you for 30 bucks.

Vince

[Fredduck]

You tried both stores?
The south store seems to have more stock?
You could use a BF hammer to remove them
Does Canadian tire still rent tools?

[4PLAYZJ]

Don't use a pickle fork to remove ball joints.   Remove the castle nuts and hit the knuckle on the side with a hammer where the joint slides through the knuckle.  Hit the knuckle really hard on the top joint a few times then hit the lower.  Might be a good idea to leave the lower nut on a few threads because when the lower lets go the knuckle will just fall off.  Have fun.

[calltrex]

i got everthing off.  just cant get the joints out.  i dont got a torch to heat it up.

just need the removal kit..

[calltrex]

looking for this kit

http://www.bosstoolsupply.com/index.asp?PageAction=VIEWPROD&ProdID=11247&dc=adwords&gclid=CKbm6diX0pMCFSQtagodq2Ngiw

[Vinman]

My mistake Dava,
I have the U-joint press, not the complete kit.

Vince

[calltrex]

Found a set today.  Was a little more but all the pieces were good quality

[Elsifer]

Thats the one PA sells.

Useful unit. I've done 4 balljoints with it, and I don't know how many ujoints.

Handy unit, fits nice into a loaded trail heep too for trail tools.

[SwampSinger]

I got the same kit from PA except it 's in a red box...


I paid about $100 for it... it works well.

[Chiram000]

Did a search, and this was the most relevant thread.. so hopefully this is not too much of a thread hijack.. Any of you guys who own the U joint kit want to lend it out? I've attempted to get my old one out with the BFH approach and a modified C clamp approach but no such luck as she is seized in their good. Would be greatly appreciated if someone could lend theirs out or even supervise w/ beer privileges pm if interested!.

-Tyler