Calgary Jeep Association

Author Topic: Clutch switch......  (Read 842 times)

0 Members and 1 Guest are viewing this topic.

Offline Evil-Jeep

  • UberWheeler
  • Posts: 319
Clutch switch......
« on: July 24, 2008, 03:00:38 PM »
Looks like the electricle switch that reads wether or not the clutch pedal is pushed in or not is going(or really dirty), I was thinking that I would remove or bypass the switch completely by wiring it up to a push button or toggle switch. I assume that the switch is only used while starting the Jeep. Has any one tried this or be able to advise wether or not this will work?
“I contend that we are both atheists. I just believe in one fewer god than you do. When you understand why you dismiss all the other possible gods, you will understand why I dismiss yours.”

Offline Tinkerer

  • UberWheeler
  • Posts: 313
    • My (OLD OLD OLD) website
Re: Clutch switch......
« Reply #1 on: July 24, 2008, 09:16:54 PM »
No cruise control?   I'd hate to have you blow a motor because it revved the snot out of it when you pushed in the clutch and started to slow down!
2004 TJ Rubicon 2.5" Cage Puck Lift
LT285/75R15 Trxus MT's
ARB Bullbar and Warn XD9000i winch
Garvin Wilderness Swingaway Rack
Cobra 75WXST CB, Yaesu FT8900 Ham
VE6PDB - usually on VE6RYC

Offline Evil-Jeep

  • UberWheeler
  • Posts: 319
Re: Clutch switch......
« Reply #2 on: July 25, 2008, 09:45:23 AM »
I do have cruise, but seldomly use it. something to consider though...... Thanks
“I contend that we are both atheists. I just believe in one fewer god than you do. When you understand why you dismiss all the other possible gods, you will understand why I dismiss yours.”

Offline morerpmfred

  • Talks waaay too much!
  • Posts: 1604
Re: Clutch switch......
« Reply #3 on: July 25, 2008, 10:15:29 AM »
My cruise works perfect and the clutch disconnect switch was disconnected by previous owner. There are two different switchs.

Offline barmanjay

  • That CB Yapper
  • Posts: 729
  • Wanna buy a trail? or Garage w/attached house?
Re: Clutch switch......
« Reply #4 on: July 25, 2008, 11:26:53 AM »
The clutch safety switch can be bypassed and bridged together

I have an old yj without,.. but my other vehicles have it and I bypassed.

No issues,.. just have to make sure I'm in neutral all the time incase i use my remote start,.. LOL
The realtor that gets dirty
Dirty Old YJ , 4" spring lift and 33's  - Sold - *snif*
300C SRT8 - Workmobile

Jason Kim
Realtor
Maxwell City Central
889-4747

www.jaykim.ca


Offline Evil-Jeep

  • UberWheeler
  • Posts: 319
Re: Clutch switch......
« Reply #5 on: July 29, 2008, 10:19:46 AM »
Thanks all!!
“I contend that we are both atheists. I just believe in one fewer god than you do. When you understand why you dismiss all the other possible gods, you will understand why I dismiss yours.”