Calgary Jeep Association

Author Topic: Edge Products......Input????  (Read 1147 times)

0 Members and 1 Guest are viewing this topic.

RUBI

  • Guest
Edge Products......Input????
« on: August 12, 2008, 11:55:16 PM »
Anybody have personel experience with this ............... http://www.edgeproducts.com/product.php?pk=84&pvk=261

  Found this write up......... http://jeepforum.com/forum/showthread.php?t=403511
« Last Edit: August 13, 2008, 12:23:39 AM by RUBI »

Offline dac

  • That CB Yapper
  • Posts: 516
Re: Edge Products......Input????
« Reply #1 on: August 13, 2008, 07:49:00 AM »
I've got the kit with the air intake on an 02 TJ Sport.  Also have cat back exhaust and header.  With 31's and the 3.73 ratio mine had a lot more snap than the stock rubi for comparison.  I noticed more low end torque, could do 40-50kph in 5th and accelerate out of it.  Now than I have 33's I lost a bit but it's still pretty strong.  With the 31's when I put it on I didn't notice a difference in mileage; with the 33's I've lost a little bit, not much.  Installing it was really easy.
This is not 'Nam, this is wheeling.  There are rules.

RUBI

  • Guest
Re: Edge Products......Input????
« Reply #2 on: August 14, 2008, 02:59:36 AM »
Who did you get ur Kit through and what was the cost ????????????
 ???

Offline Matt4x4

  • UberWheeler
  • Posts: 424
Re: Edge Products......Input????
« Reply #3 on: August 14, 2008, 10:37:04 PM »
That product was on Truck Universe today, sounds like a good product
They said 25 hp and 25 ft lb increase

RUBI

  • Guest
Re: Edge Products......Input????
« Reply #4 on: August 15, 2008, 01:13:16 AM »
Ordered one today direct from Edge........I'd tend to be pretty sceptical about 25HP and ft/lbs of torque, but any increase over stock is good !!!! ::)

Offline calltrex

  • Talks waaay too much!
  • Posts: 1398
Re: Edge Products......Input????
« Reply #5 on: August 15, 2008, 08:19:20 AM »
Ordered one today direct from Edge........I'd tend to be pretty sceptical about 25HP and ft/lbs of torque, but any increase over stock is good !!!! ::)

make sure you get the canadian version.  theres a different connector or something like that...
........___________
.......//.......""""......\\
....=//___________\\=
.....(@)___JEEP_(__@)
......\____I===I____/
.../""""/........J
../""""/=(=)___....../""""/
./___/............==/""""/
....................../___

Offline Matt4x4

  • UberWheeler
  • Posts: 424
Re: Edge Products......Input????
« Reply #6 on: August 15, 2008, 03:48:21 PM »
you are right, any increase over stock is good

Been looking into power adders myself, but I think I will leave my heep stock with a few add-ons for mild wheeling. This is my daily driver.

I will have my other truck to beat to hell and break stuff. Thinking a lifted 1990's stroker 454/205 doubler chev crewcab with 44's on d60's, shortened wheelbase. My dodge truck is the company truck and backup   8)

Offline dac

  • That CB Yapper
  • Posts: 516
Re: Edge Products......Input????
« Reply #7 on: August 21, 2008, 05:38:46 PM »
I bought mine through Mopac, seemed to be the best deal in town at the time.
This is not 'Nam, this is wheeling.  There are rules.

Offline calltrex

  • Talks waaay too much!
  • Posts: 1398
Re: Edge Products......Input????
« Reply #8 on: August 21, 2008, 06:02:34 PM »
how much?
........___________
.......//.......""""......\\
....=//___________\\=
.....(@)___JEEP_(__@)
......\____I===I____/
.../""""/........J
../""""/=(=)___....../""""/
./___/............==/""""/
....................../___

RUBI

  • Guest
Re: Edge Products......Input????
« Reply #9 on: August 21, 2008, 07:10:04 PM »
Direct from Edge...... I'll let you know the total when it arrives.
 I didn't forget bout ya Dava, still trying to round up the missing piece  ;)

http://www.edgeproducts.com/products.php?car_motor_key=50&category_key=all

Offline dac

  • That CB Yapper
  • Posts: 516
Re: Edge Products......Input????
« Reply #10 on: August 21, 2008, 07:54:45 PM »
Mopac was 936 plus tax for the full kit in Sept. 2006.  Probably lower by now though.
This is not 'Nam, this is wheeling.  There are rules.

RUBI

  • Guest
Re: Edge Products......Input????
« Reply #11 on: August 22, 2008, 12:41:19 AM »
$545.59 for the TB and module kit includes shipping handling etc....... ( no air intake tube/filter)

RUBI

  • Guest
Re: Edge Products......Input????
« Reply #12 on: September 04, 2008, 01:17:22 PM »
FINALLY !!!!!!!  >:( 
 Just finished the install on the EDGE TB and module...........WOW !!!    :o   Didn't think it would be as impressive as it is, right from idle, mid range and up it pulls noticeably harder through all the gears. Can't wait to get out and play with it wheeling.........still need those short arms before I can get out again.
 Seems there is always something holding me up !!! :-[