Calgary Jeep Association

« previous next »
Pages: [1]   Go Down

Author Topic: AMC 360 in a YJ frame  (Read 1060 times)

0 Members and 1 Guest are viewing this topic.

Offline Eagle Jeeper

  • Budget Lift
  • Posts: 286
AMC 360 in a YJ frame
« on: January 19, 2009, 08:25:29 PM »
Has anyone any experience doing this I have a good AMC360/TF727/Dana 300 setup that I want to put in a YJ frame and before I get started thought I would test the field to get input Thanks in advance
Logged
94 YJj7, AMC360,T176,Dana300(twin stick, Dana 44 4:56, 14 bolt FF welded 4:56, 2 1/2" susp SOA, 38/12.5/15 TSL's, warn 8274,  Custom dash

Offline hps4evr

  • Administrator
  • Talks waaay too much!
  • Posts: 2959
Re: AMC 360 in a YJ frame
« Reply #1 on: January 20, 2009, 06:48:03 PM »
start lookin for the adapters. adance adapters or novak, if neither have then you're on your own. and from what ive heard they suggest using GM or Ford
engines to swap as they are usually easier. but, you allready have the engine combo so you may end up with custom mounts.
Logged
YJ=Y’all Jealous

Offline stroker sahara

  • UberWheeler
  • Posts: 361
Re: AMC 360 in a YJ frame
« Reply #2 on: January 20, 2009, 09:28:03 PM »
Get some of these mounts from AA:

http://advanceadapters.com/product/2274/713120.html

You will have to build a transmission crossmember. Also a front diff with PS drop is required, but I am sure you already know that.

A friend of mine did almost the exact swap in his YJ and went easy.
Logged
If you want to run with the big dogs you have to be able to pee in the tall grass.


1989 YJ SOA, 36" SX, 4.6 Stroker...

Offline AMCJeep

  • Budget Lift
  • Posts: 204
  • Wheel, break, fix, repeat ...
Re: AMC 360 in a YJ frame
« Reply #3 on: January 21, 2009, 06:41:09 AM »
Your NP231 will bolt up to the AMC trans, and for that matter the YJ trans would too!
You wouldn't have to swap out the front diff if you used the YJ T-case.
Logged
09 JK Wrangler Unlimited Sahara Sunburst Orange
90 YJ AKA Papa Smurf"4.2, AX15, Completely unmolested
03 Ram 2500 QC, LB, 5.9 CTD

Offline Eagle Jeeper

  • Budget Lift
  • Posts: 286
Re: AMC 360 in a YJ frame
« Reply #4 on: January 21, 2009, 08:42:11 PM »
Thanks Guys

I think I'm going to go with the AA adapters for the 150 it will save alot of headaches.  Yeh I already have the diffs they are from a 79 Chevy 3/4 ton Pass drop 44 and 14bolt. SOA on heavy 4 1/2" YJ lift springs.  The motor tranny trans combo is coming out of my CJ7.  I like the motor its been really reliable for me. 

Logged
94 YJj7, AMC360,T176,Dana300(twin stick, Dana 44 4:56, 14 bolt FF welded 4:56, 2 1/2" susp SOA, 38/12.5/15 TSL's, warn 8274,  Custom dash

Offline hps4evr

  • Administrator
  • Talks waaay too much!
  • Posts: 2959
Re: AMC 360 in a YJ frame
« Reply #5 on: January 21, 2009, 10:27:09 PM »
sounds like a cool swap. but you do know that with a spring over and 4.5" lift springs will get you about 9" of lift! big lift for big tires i guess;)
Logged
YJ=Y’all Jealous

Offline Eagle Jeeper

  • Budget Lift
  • Posts: 286
Re: AMC 360 in a YJ frame
« Reply #6 on: January 21, 2009, 10:58:03 PM »
yes i am aware it sitting in my shop
Logged
94 YJj7, AMC360,T176,Dana300(twin stick, Dana 44 4:56, 14 bolt FF welded 4:56, 2 1/2" susp SOA, 38/12.5/15 TSL's, warn 8274,  Custom dash
Pages: [1]   Go Up
« previous next »